//contact //product
HT-2819
Dahometer
1 set
5-7 days
1 years,Lifelong maintenance
TT/Western Union/Paypal etc
Negotiable
Availability: | |
---|---|
Quantity: | |
Laboratory Foam Polymer Material Reciprocating Compression Testing Machine
Overview:
This product is suitable for the determination of the thickness of the porous elastic material used in the interior decoration to reduce value and lower hardness value, accurate measure sag hardness of sponge, foam and other materials. Another also can be used to producing the seat foam (such as the back of a chair, seat cushion foam, etc.) specified sag hardness measurement, accurate to measure the hardness of sag of the bubble seats.
Specification:
1. The number of test cycles is 80,000 times, but the test cycle number of this instrument can reach 100,000 times, and it is equipped with an automatic adjustment device. Other specifications meet the QB/T 2819-2006 standard
2. Control method: touch screen control
3. Induction method: precision load cell
4. Test force value range: 0—200kg can be set
5. Unit switching: Kg, N, LB
6. Upper pressure plate: diameter 200mm, bottom rounded corner R1mm
7. Lower platform: 420×420mm, vent diameter 6mm, spacing 20mm
8. Maximum stroke: 200mm
9. Testing speed: 100±20mm/min
10. Range of test times: 1-999999 times, configurable
11. Power source: servo motor
12. Transmission mode: precision ball screw
13. Power supply: single-phase 220V, 50Hz/60Hz
14. Equipment weight: about 160kg
Laboratory Foam Polymer Material Reciprocating Compression Testing Machine
Overview:
This product is suitable for the determination of the thickness of the porous elastic material used in the interior decoration to reduce value and lower hardness value, accurate measure sag hardness of sponge, foam and other materials. Another also can be used to producing the seat foam (such as the back of a chair, seat cushion foam, etc.) specified sag hardness measurement, accurate to measure the hardness of sag of the bubble seats.
Specification:
1. The number of test cycles is 80,000 times, but the test cycle number of this instrument can reach 100,000 times, and it is equipped with an automatic adjustment device. Other specifications meet the QB/T 2819-2006 standard
2. Control method: touch screen control
3. Induction method: precision load cell
4. Test force value range: 0—200kg can be set
5. Unit switching: Kg, N, LB
6. Upper pressure plate: diameter 200mm, bottom rounded corner R1mm
7. Lower platform: 420×420mm, vent diameter 6mm, spacing 20mm
8. Maximum stroke: 200mm
9. Testing speed: 100±20mm/min
10. Range of test times: 1-999999 times, configurable
11. Power source: servo motor
12. Transmission mode: precision ball screw
13. Power supply: single-phase 220V, 50Hz/60Hz
14. Equipment weight: about 160kg
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.