//contact //product
You are here: Home » Products » Plastic Testing Equipment » ISO1133 ASTMD1238 PP Meltblown Melt Flow Index Mfi Testing Machine

Product Detail

ISO1133 ASTMD1238 PP Meltblown Melt Flow Index Mfi Testing Machine ISO1133 ASTMD1238 PP Meltblown Melt Flow Index Mfi Testing Machine


ISO1133 ASTMD1238 PP Meltblown Melt Flow Index Mfi Testing Machine

Share to:
sharethis sharing button
Standard: ASTMD1238,ISO1133
Accurate volume time :0.001s
Temperature range: 0 ℃ -400 ℃
  • HT-3682VM-BA

  • Dahometer

  • 1 set

  • 5-7 days

  • 1 years,Lifelong maintenance

  • TT/Western Union/Paypal etc

  • Negotiable


ISO1133 ASTMD1238 PP Meltblown Melt Flow Index Mfi Testing Machine

The core layer melt-blown cloth of the mask is made of high-melt PP polypropylene melt-sprayed at high temperature, and has good fluidity. Its melt index range is 1000 ~ 2500g / 10min or higher, which belongs to ultra-high fluidity modified plastics. It is impossible to complete the test using the MFR quality method. According to the ASTMD1238 standard, a displacement sensor needs to be arranged at the lower end of the piston rod, which means that the volume of the extruded material is measured in a unit time, which is calculated by the displacement of the piston within a certain time.The unit is cm³ / 10 min, which is the MVR volume method; Then through the melt density at 230 ℃, the MFR melt index value is automatically displayed in g / 10 min; in order to prevent the melt materials from flowing out of the die, this method requires a die block with good sealing performance at the bottom of the die.

The most significant advantage of this method is the elimination of the effect of mechanical cutting, which can simultaneously record the characteristics of the distance of the piston displacement and the test time, while achieving high accuracy, even for short measurement time and small piston displacement, such as: high flow rate, PP polypropylene with a time of about 0.600S.

HT-3682VM is developed and produced by Hongtuo, which meets the requirements of ASTM D1238 standard, and also meets ISO1133, GB / T3682-2018, JIS and other standard specifications; it is developed and designed for PP polypropylene high melting index, which is widely used in mask meltblown cloth source PP Polypropylene modified plastics production enterprises, melt-blown fabric production enterprises, melt-blown machine production enterprises and other industries and related colleges, scientific research institution and quality inspection departments.

The HT-3682VM-7PT temperature control core adopts an independent research and development of dual temperature control system, using dual heating coils, PT100 platinum resistance temperature sensor, with fast heating rate, high temperature accuracy and other characteristics, 4 hours temperature drift does not exceed ± 0.2 ℃; displacement sensor adopt Japan Omron high-precision photoelectric rotary encoder with an accuracy of 0.01mm, which can accurately and quickly monitor the displacement distance of the melt at the discharge port, that is, the MFR melt rate, the unit is g / cm3

* According to ASTM D1238,ISO1133-1:2011,GB/T3682.1-2018 standard specification, the MFR value in the above test is obtained by the MVR value and the density value under temperature at 230 ℃.


A. Specially developed and produced for PP meltblown materials

B. Special models, easy to use, anyone can operate

C. High accuracy of temperature control, fast heating rate, 4 hours temperature drift does not exceed ± 0.2 ℃

D. High displacement accuracy, up to 0.01mm; the die material is tungsten carbide

E. Volumetric test without cutting, can directly output the test results

F. Accurate volume time 0.001s

G. Built-in micro printer, can print test data at any time

H. The density value of the material at a specific temperature can be calculated by the ratio of the volumetric mass method

J. It can be connected to the computer via USB, and the test conditions can be set on the computer through the software, the data can be printed, and the data can be stored (optional)

Model difference

1. HT-3682VM-BA: 4.3 inch color screen button

2. HT-3682VM-5PT: 5 inch touch screen with top and bottom structure or 5 inch touch screen with left and right structure

3. HT-3682VM-7PT: left and right structure, dual temperature monitoring 7 inch touch screen



Related Products

About Us

Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.

Contact Us
   Contact:Vicky He
   Mobile/WhatsApp:+86 13592795134​​​​​​​
  Address:No. 2-1, Xinya Road, The Third Industrial Park, Dalingya Village, Daojiao Town, DongGuan, GuangDong, CN
Copyright  2021 Guangdong Hongtuo Instrument Technology Co.,Ltd Technology by www.leadong.com