English 
| Quantity: | |
|---|---|
50J Izod Charpy Impact Tester Lab Izod Charpy Impact Testing Machine with CE
Mainly used for hard plastics, reinforced nylon, glass steel, ceramics, cast stone, electrical insulation materials and other non-metallic material impact toughness measurement.
Specification:
Model | HT-5D-CM | HT-50D-CM | HT-5-50D-CM |
Izod pendulum energy | 1J, 2.75J, 5.5J | 11J, 22J | 1J, 2.75J, 5.5J, 11J, 22J |
Charpy pendulum energy | 1J, 2J, 4J, 5J | 7.5J, 15J, 25J, 50J | 1J, 2J, 4J, 5J, 7.5J, 15J, 25J, 50J |
Charpy impact speed | 2.9m/s | 3.8m/s | 2.9m/s(≤5J), 3.8m/s(≥7.5J) |
Charpy pendulum center distance | 230mm | 395mm | 230mm(≤5J), 395mm(≥7.5J) |
Izod impact speed | 3.5m/s | ||
Izod pendulum center distance | 335mm | ||
Pendulum angle | 150° | ||
Measurement accuracy | ±0.1% | ||
Resolution | 0.03% | ||
The distance from the izod impact blade to the upper plane of the jaw | 22mm±0.2mm | ||
Izod edge fillet radius | R=0.8mm | ||
Charpy impact edge fillet radius | R=2mm±0.5mm | ||
Charpy impact blade angle | 30°±1° | ||
Charpy impact edge fillet radius | R=1mm±0.1mm | ||
Charpy impact support front angle | 5° | ||
Charpy impact support rear angle | 10° | ||
Output mode | Printout or U-disk output | ||
Supply voltage | 110~230VAC 50/60Hz | ||
Appearance size (L*W*H) | 85cm*37cm*65cm | 106cm*37cm*78cm | 106cm*37cm*78cm |
Weight | About 80kg | About 100kg | About 120kg |
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
50J Izod Charpy Impact Tester Lab Izod Charpy Impact Testing Machine with CE
Mainly used for hard plastics, reinforced nylon, glass steel, ceramics, cast stone, electrical insulation materials and other non-metallic material impact toughness measurement.
Specification:
Model | HT-5D-CM | HT-50D-CM | HT-5-50D-CM |
Izod pendulum energy | 1J, 2.75J, 5.5J | 11J, 22J | 1J, 2.75J, 5.5J, 11J, 22J |
Charpy pendulum energy | 1J, 2J, 4J, 5J | 7.5J, 15J, 25J, 50J | 1J, 2J, 4J, 5J, 7.5J, 15J, 25J, 50J |
Charpy impact speed | 2.9m/s | 3.8m/s | 2.9m/s(≤5J), 3.8m/s(≥7.5J) |
Charpy pendulum center distance | 230mm | 395mm | 230mm(≤5J), 395mm(≥7.5J) |
Izod impact speed | 3.5m/s | ||
Izod pendulum center distance | 335mm | ||
Pendulum angle | 150° | ||
Measurement accuracy | ±0.1% | ||
Resolution | 0.03% | ||
The distance from the izod impact blade to the upper plane of the jaw | 22mm±0.2mm | ||
Izod edge fillet radius | R=0.8mm | ||
Charpy impact edge fillet radius | R=2mm±0.5mm | ||
Charpy impact blade angle | 30°±1° | ||
Charpy impact edge fillet radius | R=1mm±0.1mm | ||
Charpy impact support front angle | 5° | ||
Charpy impact support rear angle | 10° | ||
Output mode | Printout or U-disk output | ||
Supply voltage | 110~230VAC 50/60Hz | ||
Appearance size (L*W*H) | 85cm*37cm*65cm | 106cm*37cm*78cm | 106cm*37cm*78cm |
Weight | About 80kg | About 100kg | About 120kg |
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
![HT-KL120 Table Type Rubber Mixing Machine [Electric Heating]Digital Open Rubber Mixer/Plastic Double Roll Mixer](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/loBpiKnllkSRqkjjinipio/tupian1-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating],Rubber Kneader Equipment HT-KL80](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/lnBpiKnllkSRqkjjinjoio/7_800-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating+Water Cooling]，Rubber Mixer Machine HT-KL120-EW](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/llBpiKnllkSRqkjjinoiio/tupian1-640-640.png)
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.