Paint Leather Wear Abrasion Resistance Test Machine Taber Abrasion Tester for Lab

Paint Leather Wear Abrasion Resistance Test Machine Taber Abrasion Tester for Lab

Application:

DH-TA-01 The specimens were cut with a standard cutter and worn with a specified type of grinding wheel with a certain weight load. After the specified revolution, the specimens were taken out to observe the condition of the specimens after grinding or the weight difference between the specimens before and after the test. Wear index calculation formula: wear loss weight/number of test turns ×1000 Optional grinding wheel number: H18,H22, CS10,CS17,CS32,CS33

Standards:

DIN 53754, 53799, 53109, 52347, TAPPI T476, SATM D3884, ISO 5470

Specification:

1.Testing sheet:inner diameter(D)3mm

2.Abrasion wheel:φ2"(Max.45mm)(W)1/2"

3.Centre interval for abrasion wheel :63.5mm

4.Interval for abrasion wheel and testing sheet:37~38mm

5.Rotating speed:60-72r/min(can be adjustable)

6.Load:250,500,750g

7.Counter:LED 0~999,9999

8.Distance from testing sheet to suction inlet:3mm

9.Dimension:45 x 35 x 42cm

10.Weight:30kg

11.Power supply:AC 220V,10A

12.One pair of imported grinding wheel H-18;One set of cleaner

Grind Wheel Selection: