//contact //product
DH-DIN
Dahometer
1 set
5-7 days
1 years,Lifelong maintenance
TT/Western Union/Paypal etc
Negotiable
Availability: | |
---|---|
Quantity: | |
50KG Din Abrasion Resistance Tester Leather Shoes Taber Abrasion Resistance Tester
Application
This machine is suitable for the abrasion test of elastic materials, rubber, tires, conveyor belts, transmission belts, shoe soles, soft synthetic leather, leather etc. It has the characteristics of high performance, good reproducibility and easy operation.
Standards
DIN-53516,ISO/DIS-4649,GB-9867
Principle
Under a predetermined contact pressure and a given area,the specimen with sandpaper angled to measure abrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
Specifications
Roller diameter | φ150mm |
Roller length | 460mm |
Rotate speed | 40rpm |
Abrasion stroke | 40mm(20mm) |
Abrasion speed | 0.32m/sec |
Dip angle | 3° |
Specimen diameter | φ16 mm |
Thickness | 6~15 mm |
Testing load | 5N,10N |
Clamp horizontal displacement | 4.2mm/roll each lap |
Standard accessories | one set of sampler,two pieces of abrasive |
paper(VSM60#,41*47.6CM),three pieces of standard gel(φ16*8mm),one piece of power cord. |
50KG Din Abrasion Resistance Tester Leather Shoes Taber Abrasion Resistance Tester
Application
This machine is suitable for the abrasion test of elastic materials, rubber, tires, conveyor belts, transmission belts, shoe soles, soft synthetic leather, leather etc. It has the characteristics of high performance, good reproducibility and easy operation.
Standards
DIN-53516,ISO/DIS-4649,GB-9867
Principle
Under a predetermined contact pressure and a given area,the specimen with sandpaper angled to measure abrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
Specifications
Roller diameter | φ150mm |
Roller length | 460mm |
Rotate speed | 40rpm |
Abrasion stroke | 40mm(20mm) |
Abrasion speed | 0.32m/sec |
Dip angle | 3° |
Specimen diameter | φ16 mm |
Thickness | 6~15 mm |
Testing load | 5N,10N |
Clamp horizontal displacement | 4.2mm/roll each lap |
Standard accessories | one set of sampler,two pieces of abrasive |
paper(VSM60#,41*47.6CM),three pieces of standard gel(φ16*8mm),one piece of power cord. |
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.