Automatic IPX3 IPX4 IPX5 IPX6 Environment Simulated Water Shower Rain Spray Testing Chamber For Waterproof Testing

Automatic IPX3 IPX4 IPX5 IPX6 Environment Simulated Water Shower Rain Spray Testing Chamber For Waterproof Testing

This product meets GB 2423.38-90 《Basic Environmental Test Regulations for Electrical and Electronic Products Test R: Water Test Method 》, GB / T10485-2007, strictly according to the protection of IPX3...IPX4...IPX5...IPX6... grades of GB / T4942.2-93, GB 4208—93, GB 4706, GB 7000 and other corresponding national standards and other relevant technical parameters.Can carry out water test specified by corresponding standards.

In accordance with IEC60529: 2001 《Degrees of protection provided by enclosures (IP Code)，GB4208-2008 "Enclosure protection level (IP code)" 14.2.5, 14.2.6 clauses and Figure 6 and GB7000.1 "Lamps Part 1: General Requirements and Tests "9.2.6, 9.2.7 and Figure 9.5 requirements.

Specification:

Name: IPX3/4/5/6 rain test chamber

Model number: DH-IPX3.4.5.6-1000

Internal dimensions: W1000 X H1000 x D1000mm (W stands for width, H stands for height, D stands for depth)

Weight: about 300kg

Power source: AC380V three-phase 50HZ

Technical Parameters

Test range: IEC60529 IPX3-IPX4-IPX5-IPX6

Water temperature range: The spray water level is the ambient temperature.

Spray method: IPX3-IPX4 pendulum rain, IPX5-IPX6 spray rain

Spray flow: IPX3, X4 water flow per hole 0.07L / min

IPX5: 12.5 L / min ± 5% IPX6: 100 L / min ± 5%

Swing tube: semi-circular swing tube 180 °

Swing tube radius: R300 mm

Swing tube inner diameter: ∮16mm

Swing tube swing: 90 ° front and back, the angle can be arbitrarily set within a total range of 180°

Spray pendulum tube cycle: 1 ～ 20 times / minute adjustable

Nozzle placement: The nozzles are distributed on 90 ° arcs on both sides of the vertical plane.

Nozzle pitch: 50mm

Nozzle aperture: IPX3, X4: 0.4mm IPX5: 6.3mm IPX6: 12.5mm

Sample turntable size: ∮350mm

Speed of sample turntable: 1 ～ 20r / min adjustable

Sample carousel load: 20kg

Structure

Material: Inner box: SUS304 stainless steel plate

Outer box: stainless steel or painting

Box door:

Single-piece door, open to the left, flat handle, with handle on the right hand side

With observation window W300xH450mm transparent glass window

Window wiper

One pcs of illumination lamp in the box

Power distribution control cabinet:

Main power circuit breaker

Switchboard

Cooling fan

   Pump motor

Turntable rotation motor

Water circulation mode:

The bottom is recycled and reused, so as to achieve the purpose of saving water

Tap water supply valve, liquid level switch to control the water level of the water tank, water inlet filter device

Control panel: one controller, power switch, lighting switch, spray pressure regulator, water flow meter, water pressure gauge, turntable speed governor

Standard configuration: turntable speed governor, tempered glass window and indoor lights for observation, precision movable filter, low water level warning device, overflow pipe, flow meter: 0.5-5 L / min one group, 10-120 L / min one group, built-in water tank

Water circulation: use the internal circulation water tank for recycling.

Water replenishment method: using tap water supply valve, liquid level switch to control the water level in the inner tank, direct connection to tap water, no need for purified water.

Spray controller: imported touch screen controller, which can display the swing time, swing speed, swing angle, swing period, etc.

Setting method: touch direct English input.

Control mode: input commands from the human-machine interface, the PLC outputs the signal after receiving the command to control the work of the private server motor and receives the pulse signal from the servo motor to control the swing angle, swing period and swing time

Cabinet protection: low water level protection / motor overheating protection / swing tube limit protection.

total power phase sequence and phase loss protection / leakage protection / power failure protection.