English 
| Quantity: | |
|---|---|
DH-TA-01 Taber Abrasion Tester Wear Material Testing Wear Test
Application:
Good quality taber abrader is used for testing the wear-resistance of skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method is using the standard knife to cut the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
Standards:
It is built in conformance to ASTM C501 / C1353 / D4157 / D1044 / D3389 / D3451 / D3730 / D3884 / D4060 / D4685 / D4712 / D5144 / D5146 / D5324/ D6037 / D7255/ F362/ F510/ F1478/ G195/ F1978, TAPPI T476, as well as many other International DIN, MIL, EN, BN, ISO, JIS, SAE, BS, and ANSI standards.
Specification:
1.Testing sheet:inner diameter(D)3mm
2.Abrasion wheel:φ2"(Max.45mm)(W)1/2"
3.Centre interval for abrasion wheel :63.5mm
4.Interval for abrasion wheel and testing sheet:37~38mm
5.Rotating speed:60-72r/min(can be adjustable)
6.Load:250,500,750g
7.Counter:LED 0~999,9999
8.Distance from testing sheet to suction inlet:3mm
9.Dimension:45 x 35 x 42cm
10.Weight:30kg
11.Power supply:AC 220V,10A
12.One pair of imported grinding wheel H-18;One set of cleaner
Grind Wheel Selection:
Materials | Coating | Flooring | Plywood | Plastic,Leather | Cloth |
Grinding Wheel | CS10,CS17 | CS17,H18 | S-32,S-33 | H18,H22,CS17 | H18,H22,CS17 |
DH-TA-01 Taber Abrasion Tester Wear Material Testing Wear Test
Application:
Good quality taber abrader is used for testing the wear-resistance of skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method is using the standard knife to cut the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
Standards:
It is built in conformance to ASTM C501 / C1353 / D4157 / D1044 / D3389 / D3451 / D3730 / D3884 / D4060 / D4685 / D4712 / D5144 / D5146 / D5324/ D6037 / D7255/ F362/ F510/ F1478/ G195/ F1978, TAPPI T476, as well as many other International DIN, MIL, EN, BN, ISO, JIS, SAE, BS, and ANSI standards.
Specification:
1.Testing sheet:inner diameter(D)3mm
2.Abrasion wheel:φ2"(Max.45mm)(W)1/2"
3.Centre interval for abrasion wheel :63.5mm
4.Interval for abrasion wheel and testing sheet:37~38mm
5.Rotating speed:60-72r/min(can be adjustable)
6.Load:250,500,750g
7.Counter:LED 0~999,9999
8.Distance from testing sheet to suction inlet:3mm
9.Dimension:45 x 35 x 42cm
10.Weight:30kg
11.Power supply:AC 220V,10A
12.One pair of imported grinding wheel H-18;One set of cleaner
Grind Wheel Selection:
Materials | Coating | Flooring | Plywood | Plastic,Leather | Cloth |
Grinding Wheel | CS10,CS17 | CS17,H18 | S-32,S-33 | H18,H22,CS17 | H18,H22,CS17 |
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.