//contact //product
You are here: Home » Products » Universal Testing Machine » HT-GDW-5KN Microcomputer Controlled High and Low Temperature Electronic Universal Testing Machine

Product Detail

HT-GDW-5KN Microcomputer Controlled High and Low Temperature Electronic Universal Testing Machine

Share to:
sharethis sharing button
Max. Load:5KN
Load range:0.2%~100% FS
Measuring Range Of Deformation:0.2%~100%FS
Resolution :1/500000
  • HT-GDW-5KN

  • Dahometer

  • 1 SET

  • In stock

  • 1 year

  • L/C, D/A, D/P, T/T, Western Union, MoneyGram

  • negotiable

Availability:
Quantity:

HT-GDW-5KN Microcomputer Controlled High and Low Temperature Electronic Universal Testing Machine

Testing machine level: 0.5 level


 Standards

GB/T 2611-2007 <General Technical Requirements for Testing Machines>

JB/T 7406.1-1994 <Testing Machine Terminology Material Testing Machine>

GB/T 16491-2008 <Electronic Universal Testing Machine>

GB/T 16825.1-2008 <Inspection of Static Uniaxial Testing Machines Part 1: Inspection and Calibration of Force Measuring Systems of Tensile and/or Compression Testing Machines>

GB/T 22066-2008 <Evaluation of Computer Data Acquisition Systems for Static Uniaxial Testing Machines>

JJG 139-1999 <Tensile, Compression and Universal Materials Testing Machine>

JB/T 6146-2007 <Extensometer Technical Conditions>

JB/T 6147-2007 <Technical Requirements for Packaging, Packaging Marking, Storage and Transportation of Testing Machines>

GB/T 228.1-2010 <Metallic Materials - Tensile Testing Part 1: Room Temperature Test Methods>

GB/T 7314-2005 <Metallic Materials Room Temperature Compression Test Method>

GB/T 232-2010 <Metal Materials - Bending Test Methods>

Other non-metal testing standards

Technical Instructions

Brand

HONGTUO

Model

HT-GDW

Detail Model

-5KN

-10KN

Capacity

KN

5

10

KG

500

1000

lb

1102

2204

Sensor

The USA

Servo motor

Panasonic

Unit switching

G、Kg、lb、N、KN

Displacement unit switch

Inch  cm  mm

Testing machine level

0.5 class

Effective force measuring range

0.2%~100%FS

Force accuracy

Within ±0.5% of the indication value

Force resolution

1/500000

Displacement resolution

≤0.05μm

Displacement accuracy

Within ±0.5% of the indication value

Deformation measurement range

0.2%~100%FS

Deformation indication accuracy

Within ±0.5% of the indication value

Large deformation measurement range

1000mm (optional)

Large deformation resolution

0.01mm (optional)

Large deformation indication error limit

Within ±0.5% of the indication value (optional)

Maximum test speed

500mm/min, optional maximum 1000mm/min

Minimum test speed

0.01mm/min

Speed accuracy

Within ±0.5% of the indication value

Crossbeam stroke measurement height

Test stroke without fixture: 1330mm; test stroke with fixture: 800mm

Effective width

750mm

Fixture configuration

One set of film stretching clamps and one set of 180 degree peeling clamps

Return method

Two options: manual or automatic, automatically return to the initial position after the test or manually return to the initial position

Shutdown mode

1. Automatic shutdown at the maximum breaking value

2. Shutdown with upper and lower safety limit settings

Safety devices

1. Mechanical travel switch protection

2. Emergency stop switch emergency braking

Overload protection

When the load exceeds 100%, the machine automatically protects

Accessories

1 power cord, 1 test software program, 1 data cable, 1 instruction manual, 1 certificate

Optional accessories

Anti-splash device (protective door), computer, printer, small deformation metal extensometer, large deformation extensometer

Supply voltage

220V AC/ 50Hz (Can be selected according to country110V AC/60Hz)

Host size/Weight

Model including base: (Length*Width*Height)800mm*750mm*2100mm / about 205KG

High and low temperature box parameters (compressor refrigeration)

Ø Studio size: 400*400*700 (mm) (D*W*H) Size can be customized according to equipment

Ø Overall dimensions: 600*1380*1640 (mm) (D*W*H) Dimensions can be customized according to the equipment

Ø Temperature range: -20℃~+150℃  

Ø Temperature change: Heating: (-20)℃~ (+150)℃ 1~3℃/min

Ø Cooling: 0℃~(-20)℃ 1℃/minN

Ø Control accuracy: ≤±1℃

Ø Temperature fluctuation: ≤2℃

Ø Temperature uniformity: ≤2℃

Ø Humidity range: 20% ~ 98%R.H.

Ø Humidity fluctuation: ±3%R.H.

Ø The upper and lower sides of the cabinet correspond to Ф80*2

Ø Cooling method: compressor refrigeration

Structure and materials

Main configuration

Device name

High and low temperature test chamber

Main configurat

-ion

Cabinet

Structure type

Integrated, the test box, controller and refrigeration unit are installed separately.

Shell material

Stainless steel plate SUS304 1.0mm

Studio material

Stainless steel plate SUS304 1.0mm

Insulation Materials

Rigid polyurethane foam, insulation layer thickness 80mm

Test hole

The upper and lower centers of the box have a diameter of Φ80*2

Rail rack

Guide rail frame for high and low temperature chamber

Customized size according to main device

Control System

Temperature controller

Single point temperature controller

Temperature control performance

Temperature resolution:±0.1℃

Temperature Sensor

Class A high-precision industrial platinum thermal resistor PT100

Operation mode

Constant (fixed point).

Mainly perform electrical appliances

Schneider AC contactors, thermal relays, small relays, transformers, solid state relays, etc.

Compressor refrigeration system

Compressor

Refrigeration Compressors

The electromagnetic valve

Original imported from Japan "Herigiya"

Filter drier

Original imported from Denmark "Danvers"

Copper pipe

High-quality oxygen-free copper pipe, nitrogen-filled welding

Energy regulating expansion valve

Original imported from Denmark "Danvers"

Evaporator

Self-designed domestic high-quality and efficient fin type

Cooling method

Air cooling

Installation features

A. The entire refrigeration system is filled with nitrogen and maintained at a pressure of 2.2Mpa for leak detection testing.

B. The heating and cooling systems are completely independent.

C. Equipped with the company's characteristics, high-temperature refrigerator return air cooling system.

D. All refrigeration system action procedures are completely automatically controlled by instruments.

Heating system

Temperature control element

Solid state relay

Heating method

High quality nickel-chromium alloy wire electric heater

Blowing system

Circulatory system

Fan forced convection method

Motor

Extended stainless steel shaft motor

Wind leaves

Centrifugal fan blade

Vibration reduction measures

Compressor

Special rubber vibration damping

Safety devices

Security alarm action

Sound and light alarm prompts

Test chamber structural parts

Ground protection

Test box studio

Independent over-temperature protection system

Compressor

Over voltage protection/over temperature protection /overload protection

Power supply

Over current/leakage protection

Accessories

1 power cord

Document

Warranty card/certificate/instruction manual

Main features

Project

Description

Air conditioning method

Forced ventilation internal circulation, balanced temperature control method (BTCH). In this method, when the refrigeration system is continuously working, the central control system performs amplification, analog/digital conversion, nonlinear correction and temperature adjustment based on the collected temperature and humidity signals in the box. Compare them with the humidity set value (target value), and the resulting deviation signal is calculated by PID to output an adjustment signal, automatically controlling the output power of the heater, and finally making the temperature in the box reach a dynamic balance.

Air circulation device

Air circulation device: Built-in air-conditioning room, circulating air duct and long-axis centrifugal fan, using efficient refrigerator and energy regulation system, effective heat exchange through efficient fan to achieve the purpose of temperature change. By improving the air blast flow, the air flow rate and the heat exchange capacity between the heater surface and the air are increased. Through the adjustment of the air outlet, the temperature uniformity of the test chamber is greatly improved.

Heating method

High quality nickel-chromium alloy electric heater

Cooling method

Multistage diaphragm air heat exchanger

Cooling System

Project

Description

Refrigeration Compressors

The refrigeration system is composed of "French Tecum" compressor. Compared with similar types of refrigeration compressors, this type of compressor has large cooling capacity, low noise, low energy consumption and high efficiency. Able to operate stably and reliably for a long time. It greatly reduces the user's usage costs, helps reduce the noise of the equipment, prolongs the service life of the equipment, and improves the economy of equipment use.

Refrigeration principle

Both the high and low refrigeration cycles adopt the reverse Karo cycle, which consists of an isothermal process and an adiabatic process. The process is as follows: the refrigerant is adiabatically compressed to a higher pressure by the compressor, and work is consumed to increase the exhaust temperature. The refrigerant exchanges heat isothermally with the surrounding medium through the condenser and transfers heat to the surrounding medium. After the refrigerant passes through the shut-off valve, the adiabatic expansion does work, and the temperature of the refrigerant decreases. Finally, the refrigerant absorbs heat isothermally from the higher temperature object through the evaporator, causing the temperature of the object to be cooled to decrease. This cycle repeats itself to achieve the purpose of cooling.

Refrigeration evaporator

Single side welding, cold expansion

Cooling method

Air-cooled

Main refrigeration accessories

Compressor, solenoid valve, filter, etc.

Refrigerants

Use environmentally friendly refrigerant R404A.

Its ozone depletion coefficient ODP value is 0.

Safety protection

This test box meets the national electrical safety standards and wiring specifications. Each wiring port is clearly marked and is not exposed.

The studio is absolutely insulated from all power sources, making it safe and reliable.

Complete security protection functions (below)

A. Reliable grounding protection device

B. The whole machine power supply leakage/open circuit/ phase loss /overvoltage /undervoltage protection

C. Studio over-temperature protection

D. Refrigeration compressor overpressure protection

E. Refrigeration compressor overload protection

Equipment usage conditions

Project

Description

Voltage

Single-phase wire system 220VAC±10%

Ambient temperature

5~35℃

environment humidity

≯85%R.H;

Atmospheric pressure

86~106Kpa;

Environmental conditions

There is no strong vibration, no strong electromagnetic field interference, no high concentration of dust and corrosive substances around the equipment site, and no direct sunlight or direct radiation from other heat sources.

The equipment should be placed horizontally in a well-ventilated test room, with sufficient space around it for operation and maintenance.

Functions and uses

This series of electronic universal testing machines is a classic and practical model developed by our company, and it is also the mainstream model currently produced. Our company learned from Japanese technology and based on previous generations of models, it has been designed and developed through many new upgrades. The host structure and measurement and control system have been significantly upgraded technologically, with a more reasonable structure and more complete functions. It is the leading technology in the industry. A new generation of electronic universal testing machine. More than 1,000 units of this series of testing machines have been produced. After a large number of practical tests and continuous improvement, the technology and process are mature, high reliability and low failure rate, and are well received and welcomed by the market and users.

The testing machine adopts Japan's Panasonic digital AC servo speed regulating system and servo motor with high speed control accuracy and stable performance as the driving system. The specially designed synchronous toothed belt deceleration system and ball screw pair drive the moving beam movement of the testing machine. The control and data processing software based on database technology, which uses Windows as the operating platform, realizes the screen display of test force, test force peak value, beam displacement, specimen deformation and test curve. All test operations can be performed on the computer screen with the mouse. The input method is completed, with a good human-machine interface and easy operation. The independent dual-channel fully digital programmable amplifier realizes automatic shifting, zeroing and calibration of physical zeroing, gain adjustment and test force measurement in a true sense without any analog adjustment links. The control circuit is highly integrated and the potential is completely eliminated. Mechanical adjustment devices such as regulators have simple structure and reliable performance. It ensures that the machine can achieve closed-loop control of parameters such as test force, specimen deformation and beam displacement, and can realize tests such as constant force, constant displacement, constant strain, constant rate load cycle, and constant rate deformation cycle. Users can use the PC expert system to independently set control modes such as constant stress, constant strain, and constant displacement, and can switch between various control modes smoothly and without interruption. It can realize data processing that complies with various standards such as GB, ISO, JIS, ASTM, DIN and so on. It has good scalability in particular. The processing results can be stored on disk in the form of ASCII code, which is useful for re-analysis of test data, database management, Post-processing such as network transmission provides convenience.

This series of electronic universal testing machines are powerful and widely used. It can be used to test mechanical properties such as tension, compression, bending, shearing, peeling, tearing, extraction, and ring stiffness of various metals, non-metals and composite materials. It is suitable for metal wires, metal foils, metal plates and metal Mechanics of metal materials such as rods and plastic pipes, plastic profiles, waterproof membranes, geotextiles, wires and cables, textiles, fibers, rubber, ceramics, concrete, adhesives, food and medical packaging, films, wood, paper and other non-metallic materials Testing can be widely used in manufacturing enterprises such as machinery manufacturing, vehicle manufacturing, aerospace, petrochemicals, wires and cables, papermaking, textiles, construction and building materials, and in quality supervision and inspection departments, scientific research institutes and other research departments, as well as universities and technical schools Schools conduct teaching and demonstrations.

For non-metallic material testing, the large test space, wide speed range, and various attachment configurations can meet the testing needs of various non-metallic materials.

A variety of optional test accessories and test standards can meet the testing of different materials and achieve the effect of one machine with multiple uses.


Previous: 
Next: 

Related Products

About Us

Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.

Contact Us
​​​​​​​​​​​​​​ 
   Contact:Julie Zhong
   Tel:+86-0769-22403424
   Mobile/WhatsApp:+86 13267004347
  Email:sales03@hongtuo.com.cn
  Address:No. 2-1, Xinya Road, The Third Industrial Park, Dalingya Village, Daojiao Town, DongGuan, GuangDong, CN
Copyright  2021 Guangdong Hongtuo Instrument Technology Co.,Ltd Technology by www.leadong.com