HT-PWS-10
HONTOTEST
One set
5-7 days
1 year,Lifelong maintenance
T/T, Western Union,PayPal,Payoneer
Negotiable
| Availability: | |
|---|---|
| Quantity: | |
HT-PWS-10 10kN Electro-hydraulic Servo Dynamic Fatigue Testing System for Metal Non-metal Material Fatigue Life Test
Overview
The HT-PWS-10 electro-hydraulic servo dynamic fatigue testing system consists of a 10kN actuator, a constant pressure servo pump station, a dynamic controller, control software, an industrial control computer, fixtures, and a piping system.
Standard Compliance:
GB/T3075 "Metallic Materials - Fatigue Testing - Axial Force Control Method"
Tests Performed:
Mechanical fatigue property testing of materials
Achievable Waveforms:
Sine wave, triangle wave, square wave, and other externally input waveforms;
With necessary fixtures, it can also perform dynamic and static fatigue life tests on various other metallic and non-metallic materials, structural components, parts, and assemblies.
Main Technical Specifications of the System
(1) Maximum Dynamic Test Force: ±10kN;
(2) Maximum Static Test Force: 10kN;
(3) Test Force Measurement Range: 2%-100%FS;
(4) Test Force Indication Accuracy: ≤±1% (2%-100%FS);
(5) Dynamic Test Force Indication Fluctuation: ±0.5%FS;
(6) Sine Wave Distortion ≤1%;
(7) Maximum Actuator Displacement: ±45mm;
(8) Displacement Measurement Accuracy ≤±0.1FS;
(9) Main Test Waveforms: Sine wave, square wave, triangle wave;
(10) Test Frequency Range: 0.01-10Hz;
(11) Test Fixtures: 1 set of dedicated test fixtures;
(12) Control System: Fully digital servo control, closed-loop control circuit, smooth switching during testing. 13. Effective test space: 500mm (excluding upper and lower clamps);
(13) Column center distance: 400mm;
(14) Main unit rigidity: 3.0×10⁸ N/m;
(15) Total equipment power: 11KW
(16) Temperature control chamber: Ambient temperature - 150°C
(17) The system has comprehensive protection functions, including protection against overload, exceeding set limits, exceeding range, exceeding test parameter settings, pump station overpressure, over temperature, and oil filter clogging.
Description of Main Technical Units of the Equipment
1 Main Unit
1.1 Main Unit Frame
Two-column main unit frame, columns plated with hard chrome, upper crossbeam: hydraulic cylinder lifting, hydraulic cylinder forced locking, elastic release. The test space is adjustable, with a maximum adjustable test net space of 500mm (excluding upper and lower clamps);
1.2 Actuator
a.Located on the upper part of the main unit.
b. Maximum dynamic and static test force: ±10kN.
c. Actuator effective stroke: ±45mm;
d. Dual-rod piston structure.
e. The actuator is equipped with a hysteresis telescopic displacement sensor (imported) and an external electro-hydraulic servo valve.
f. Electro-hydraulic servo valve: 21Mpa, 20L/min;
g.The actuator's amplitude limit position is designed with a hydraulic buffer zone to avoid damage caused by runaway operation;
2 Testing Auxiliary Equipment
Auxiliary equipment can be designed and manufactured according to requirements;
3 Sensor
3.1 Load Sensor
a.Load sensor: +/-10kN, TransForce (USA);
b. Temperature compensation function;
c. Off-center load compensation function;
d. Air pressure compensation function;
e. Linearity accuracy reaches 0.03%;
3.2 Displacement Sensor
a. Hysteresis telescopic non-contact displacement sensor, stroke ±45mm (total stroke 100mm).
b. When used with a control system, the indication error is ±0.5%FS. The sensor is calibrated before leaving the factory.
4 Servo Motor:HuiChuan
5 Hydraulic servo pump station
• Total flow rate: 20 L/min, pressure: 21 MPa.
• The pump station is designed and manufactured according to standard modular principles, with mature technology and stable performance; it is equipped with a relay module connected to the actuator.
• The pump station consists of an oil pump, motor, high/low pressure switching valve group, accumulator, oil filter, cooling system, oil tank, relay module, and piping system.
• The filtration system adopts a three-stage filtration: 100μ at the oil pump inlet; 3μ at the oil source outlet.
• The oil pump is a German Voith internal gear pump, which uses involute internal gear meshing transmission, resulting in low noise, excellent durability, and long service life.
• The oil pump motor unit is equipped with a vibration damping device (using vibration damping pads) to reduce vibration and noise.
• A high/low pressure switching valve group is used for starting and stopping the hydraulic system.
• A fully enclosed standard servo oil tank is designed with a volume 4-6 times the test bench flow rate; it has functions such as temperature measurement, air filtration, and oil level display.
6 Controller and software introduction
Software introduction
6.1 This controller uses the industry's highest-speed ARM chip based on the Cortex-M7 core as its main control chip, with a main frequency of up to 480MHz. It boasts extremely high computing speed and data processing capabilities, enabling it to complete the entire control process from data acquisition, PID calculation, network communication to output control in a short time, thus achieving precise closed-loop control of the testing machine;
6.2 This controller supports remote firmware upgrades, enabling more customized functions;
6.3 Input Channels:
1) Three high-precision 24-bit A/D conversion channels, with a standard sampling frequency of 10 kHz and a resolution up to 1/500,000. Each sensor supports multi-point correction.
2) Two quadrature-coded digital input channels: one using a 10M/Bit optocoupler for differential wire encoder or servo motor encoder acquisition, and the other for displacement tracking.
3) One dedicated SSI Gray code channel, supporting common digital magnetostrictive sensors.
4) Eight digital input ports, configurable for limit switches, emergency stops, and other functions, and can be paired with a dedicated handheld control box to achieve more external functions.
6.4. Output Channels:
1) One 16-bit DA output with a 1MHz update rate and up to 1LSB precision;
2) One dither output for precise frequency and amplitude adjustment;
3) Six DO outputs with RS422 differential output.
6.5 Network Communication:
1) Industrial Ethernet interface: 10/100Mbps speed;
2) Industrial RS485 interface: supports MODBUS and HMI interconnection.
6.6 Data Saving:
This controller will automatically save the calibrated measurement and control parameters, and the calibrated parameters (non-experimental data) will not be lost even if the user changes computers at will.
7 Computers and Printers
* HP computer;
* 22" LCD monitor;
* Windows 10 operating system;
* Handheld control box (one set)
Equipment Operating Environment Requirements:
1. Ambient temperature: 10~35℃;
2. Relative humidity: not exceeding 80%;
3. No vibration in the environment;
4. No corrosive media nearby;
5. Horizontal installation on a stable foundation;
6. Power supply voltage fluctuation range not exceeding ±10% of the rated voltage.
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.