English 
| Quantity: | |
|---|---|
ISO BSEN GB/T Impact Tester for Plastics Pipes D25mm D90mm Hammer
Product introduction:
It is used to perform impact tests on plastic pipes, with the true impact rate of the batch, or production run from an extruder. Mainly used to determine if the impact resistance of thermoplastic pipes and fittings under specified conditions of impact by means of a tup (falling weight).
Standards:
It meets the technical requirements of the industry standard JB/T9389 ,and meets the test methods of GB/T14152, GB/T10002.1, GB/T5836.1, GB/T13664, GB/T16800, ISO4422, ISO3127, BSEN1411, BSEN744.
Product features:
1. The working table can be adjusted, which has the function of automatically returning to zero position and automatically go up and down.
2.It has the anti secondary impact device, which can prevent the hammer’ secondary impact by sample elastic force after the first impact.
3.The lifting mechanism uses the induction brakes and chain transmission, which make lifting steady and reliable.
4.It use the impact PLC as the control element to control the height of lifting hammer, and automatically measure the height of the hammer head with accurate position.
5.The device can automatically locate, zero, lift hammer, grasp hammer after impact. The high standard of automatization makes it easy to operate.
6.It uses the polished rod as the guiding device, with little resistance when hammer falls.
7.It can add safety protection device to ensure the operation safety.
Technical parameters:
1.Operating temperature: 10℃~35℃;
2. There is no large vibration source nearby, no strong electromagnetic field;
3. There is no corrosive medium in the environment, and the electric control box should be well ventilated;
4. Power supply: AC 380V±10％ 5A 50Hz;
5.Workbench stroke: 0～400mm;
6.Sample diameter:Φ10mm~Φ450mm;
7.Hammer head: d25, d90;Note: (SR5, SR10, SR30) are optional according to user requirements;
8.Impact height: 0～2000mm;
9.Height positioning error: ±5mm;
10.Dimensions: host (length* width*height)
730mm×700mm× 3700mm;
11.Weight of the whole machine: about 550kg.
ISO BSEN GB/T Impact Tester for Plastics Pipes D25mm D90mm Hammer
Product introduction:
It is used to perform impact tests on plastic pipes, with the true impact rate of the batch, or production run from an extruder. Mainly used to determine if the impact resistance of thermoplastic pipes and fittings under specified conditions of impact by means of a tup (falling weight).
Standards:
It meets the technical requirements of the industry standard JB/T9389 ,and meets the test methods of GB/T14152, GB/T10002.1, GB/T5836.1, GB/T13664, GB/T16800, ISO4422, ISO3127, BSEN1411, BSEN744.
Product features:
1. The working table can be adjusted, which has the function of automatically returning to zero position and automatically go up and down.
2.It has the anti secondary impact device, which can prevent the hammer’ secondary impact by sample elastic force after the first impact.
3.The lifting mechanism uses the induction brakes and chain transmission, which make lifting steady and reliable.
4.It use the impact PLC as the control element to control the height of lifting hammer, and automatically measure the height of the hammer head with accurate position.
5.The device can automatically locate, zero, lift hammer, grasp hammer after impact. The high standard of automatization makes it easy to operate.
6.It uses the polished rod as the guiding device, with little resistance when hammer falls.
7.It can add safety protection device to ensure the operation safety.
Technical parameters:
1.Operating temperature: 10℃~35℃;
2. There is no large vibration source nearby, no strong electromagnetic field;
3. There is no corrosive medium in the environment, and the electric control box should be well ventilated;
4. Power supply: AC 380V±10％ 5A 50Hz;
5.Workbench stroke: 0～400mm;
6.Sample diameter:Φ10mm~Φ450mm;
7.Hammer head: d25, d90;Note: (SR5, SR10, SR30) are optional according to user requirements;
8.Impact height: 0～2000mm;
9.Height positioning error: ±5mm;
10.Dimensions: host (length* width*height)
730mm×700mm× 3700mm;
11.Weight of the whole machine: about 550kg.
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.