English 
| Quantity: | |
|---|---|
ISO/DIS-4649 Rubber Abrasion Test Machine Efficient Shoes Abrasion Tester New
Principle：
Under a predetermined contact pressure and a given area ,the specimen with sandpaper angled to measure abrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
Standards
DIN-53516,ISO/DIS-4649,GB-9867
Main function:
This Rubber Shoes DIN Abrasion Resistance Tester is a high efficiency, good reproducibility and easy to operate,
applied to test the abrasive nature of material, as such elastic material, rubber, tires, convey belt, transmit belt, sole, synthetic leather, leather and others.
Specifications
Roller diameter φ150mm
Roller length 460mm
Rotate speed 40rpm
Abrasion stroke 40mm(20mm)
Abrasion speed 0.32m/sec
Dip angle 3°
Specimen diameter φ16 mm
Thickness 6~15 mm
Testing load 5N,10N
Clamp horizontal displacement 4.2mm/roll each lap
Standard accessories one set of sampler,two pieces of abrasive
paper(VSM60#,41*47.6CM),three pieces of standard gel(φ16*8mm),one piece of power cord.
ISO/DIS-4649 Rubber Abrasion Test Machine Efficient Shoes Abrasion Tester New
Principle：
Under a predetermined contact pressure and a given area ,the specimen with sandpaper angled to measure abrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
Standards
DIN-53516,ISO/DIS-4649,GB-9867
Main function:
This Rubber Shoes DIN Abrasion Resistance Tester is a high efficiency, good reproducibility and easy to operate,
applied to test the abrasive nature of material, as such elastic material, rubber, tires, convey belt, transmit belt, sole, synthetic leather, leather and others.
Specifications
Roller diameter φ150mm
Roller length 460mm
Rotate speed 40rpm
Abrasion stroke 40mm(20mm)
Abrasion speed 0.32m/sec
Dip angle 3°
Specimen diameter φ16 mm
Thickness 6~15 mm
Testing load 5N,10N
Clamp horizontal displacement 4.2mm/roll each lap
Standard accessories one set of sampler,two pieces of abrasive
paper(VSM60#,41*47.6CM),three pieces of standard gel(φ16*8mm),one piece of power cord.
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.