ISO179—2010 Notching Machine for Sale EN ISO 179-1:2010 Impact Sample Notch Machine

ISO179—2010 Notching Machine for Sale EN ISO 179-1:2010 Impact Sample Notch Machine 

1.Product Model：HT-1600-EL

2.Application Field：

The electronic notching machine is used for the sample preparation of the non-metallic material when it is did the impact toughness testing by izod impact tester or the charpy impact tester.It can clamp 20 samples at a time, and the processing notch is more than 60 per 10 minutes. The notch size is accurate and the efficiency is high, which greatly reduces the intensity of operation.

3.Basic Standard：

（1）ISO179—2010 Plastic Determination of impact properties of simply supported beams

 The 1st part：Non-instrumental impact test；

（2）German version EN ISO 179-1:2010；

（3）ISO180—2001ISO 180-2000 Plastic--Determination of Izod impact strength；

（4）GB/T1043-2008 Plastic Determination of impact properties of simply supported beams

 The 1st part :Non-instrument impact test；

（5）GB/T1843—2008 Plastic  Determination of impact strength of cantilever beam

4.Specifications：

1.Workbench stroke：＞160mm

2.Feed speed：30mm/min

3.Sample type：Ⅰmodel 

4.Notch type: according to tool specifications               

 A Model 45°±1° R=0.25±0.025mm

B Model 45°±1° R=1.0±0.025mm

C1 Model Notch thickness :0.8±0.1mm

C2 Model Notch thickness:2.0±0.2mm

5.Feed amount: according to the standard

6.Outer Dimension：600mm×270mm×300mm

7.Power supply voltage: 220V, single-phase three-wire system