English 
| Quantity: | |
|---|---|
LCD Display Thermal Shock Testing Machine Lab Thermal Shock Chamber for Plastic
Application:
It is one kind of testing instrument that can simulate the rapid changed temperature of nature.It can test out the physical and chemical damage on the products caused by the rapid changing of temperature.so as to find out the potential quality problem of products.and then make improvement on products.This instrument is the necessary tool for the industry of metal,plastic,aerospace,rubber,electronic.,etc.
Features:
(1)Static testing flume,can add loading wire at the testing hole.
(2)Can avoid the occupational injury from the energy storage way.
(3)Touch control color LCD displaying human-computer interface,easy operation,easy to learn.
(4)High precision of temperature controlling.PID automatic calculation controlling.
(5)Can choose initiating place,high temperature or low temperature start to cycle.
(6)Function of presetting switching on.
(7)Can set up cycle index and automatic defrosting.
(8)Can choose two slots or three slots to do impacting.
(9)Trouble shooting of abnormal or fault situation.
3.Specification:
Model | DH-RTS-60 | DH-RTS-80 | DH-RTS-100 | DH-RTS-150 | DH-RTS-250 | |
Interior dimensions(WxHxD) cm | 50*30*40 | 50*40*40 | 50*40*50 | 60*40*50 | 60*50*50 | |
Test method | pneumatic air door switching | |||||
High temperature room preheating temperature range | +60°C~+180°C(occasionally can be done at 200°C, it is not recommended to do it often) | |||||
High temperature heating rate | ‘+60 → +180 ° C, about 40 minutes | |||||
Low temperature room pre-cooling temperature range | -55 ～ 0 ℃ | |||||
Low temperature room cooling rate | ’+20 → -55 °C, about 60 minutes | |||||
Laboratory temperature deviation | ≤ ± 2 °C | |||||
Laboratory temperature range | ‘-40 ～ +100°C | |||||
Laboratory temperature recovery time | within 5 minutes | |||||
Material | Exterior material | Stainless steel plate(sus304) | ||||
Interior material | Stainless steel plate(sus304) | |||||
Insulation | Rigid polyure thane foam and glass wool | |||||
System | Blower | High-temperature box, cryogenic box, and experimental box use centrifugal fans with different power and rotating speed respectively | ||||
Heater | Incoloy sheath heater | |||||
Refrigeration system | Cascade refrigeration, compressor (using France Taikang fully enclosed compressor or Germany Bitzer semi-hermetic compressor) | |||||
Controller | Japan TFT LCD touch screen computer con trocler | |||||
Accessories | Two interlayer frames;lead hole:ɸ50mm:1(optional);recorder:1(optional) | |||||
Safety devices | No-fuse breaker,fuse,compressor overpressure,overheating,overcurrent protection,overtemperature protection,water flow protection,phase sequence protection,oil pressure protection,pressure relief protection,low voltage protection | |||||
Power(kw) | 3 ɸ 5W AC 380V±10% 50/60Hz | |||||
LCD Display Thermal Shock Testing Machine Lab Thermal Shock Chamber for Plastic
Application:
It is one kind of testing instrument that can simulate the rapid changed temperature of nature.It can test out the physical and chemical damage on the products caused by the rapid changing of temperature.so as to find out the potential quality problem of products.and then make improvement on products.This instrument is the necessary tool for the industry of metal,plastic,aerospace,rubber,electronic.,etc.
Features:
(1)Static testing flume,can add loading wire at the testing hole.
(2)Can avoid the occupational injury from the energy storage way.
(3)Touch control color LCD displaying human-computer interface,easy operation,easy to learn.
(4)High precision of temperature controlling.PID automatic calculation controlling.
(5)Can choose initiating place,high temperature or low temperature start to cycle.
(6)Function of presetting switching on.
(7)Can set up cycle index and automatic defrosting.
(8)Can choose two slots or three slots to do impacting.
(9)Trouble shooting of abnormal or fault situation.
3.Specification:
Model | DH-RTS-60 | DH-RTS-80 | DH-RTS-100 | DH-RTS-150 | DH-RTS-250 | |
Interior dimensions(WxHxD) cm | 50*30*40 | 50*40*40 | 50*40*50 | 60*40*50 | 60*50*50 | |
Test method | pneumatic air door switching | |||||
High temperature room preheating temperature range | +60°C~+180°C(occasionally can be done at 200°C, it is not recommended to do it often) | |||||
High temperature heating rate | ‘+60 → +180 ° C, about 40 minutes | |||||
Low temperature room pre-cooling temperature range | -55 ～ 0 ℃ | |||||
Low temperature room cooling rate | ’+20 → -55 °C, about 60 minutes | |||||
Laboratory temperature deviation | ≤ ± 2 °C | |||||
Laboratory temperature range | ‘-40 ～ +100°C | |||||
Laboratory temperature recovery time | within 5 minutes | |||||
Material | Exterior material | Stainless steel plate(sus304) | ||||
Interior material | Stainless steel plate(sus304) | |||||
Insulation | Rigid polyure thane foam and glass wool | |||||
System | Blower | High-temperature box, cryogenic box, and experimental box use centrifugal fans with different power and rotating speed respectively | ||||
Heater | Incoloy sheath heater | |||||
Refrigeration system | Cascade refrigeration, compressor (using France Taikang fully enclosed compressor or Germany Bitzer semi-hermetic compressor) | |||||
Controller | Japan TFT LCD touch screen computer con trocler | |||||
Accessories | Two interlayer frames;lead hole:ɸ50mm:1(optional);recorder:1(optional) | |||||
Safety devices | No-fuse breaker,fuse,compressor overpressure,overheating,overcurrent protection,overtemperature protection,water flow protection,phase sequence protection,oil pressure protection,pressure relief protection,low voltage protection | |||||
Power(kw) | 3 ɸ 5W AC 380V±10% 50/60Hz | |||||
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.