Laboratory HDT / Vicat Softening Point Temperature Tester for Plastic And Rubber

Laboratory HDT / Vicat Softening Point Temperature Tester for Plastic And Rubber

Thermal deformation and Vicat softening point temperature tester is mainly used to measure the thermal deformation temperature or Vicat softening point of thermoplastic materials such as plastics and rubber after molding, and its temperature accuracy is the key to evaluating the performance of the instrument.

Specification:

1) Temperature control range: room temperature to 300 ° C;

2) Heating rate: 120 ° C / h, 50 ° C / h;

3) Maximum temperature error: ±0.5 °C;

4) Temperature measurement point: 1;

5) number of sample racks: 3;

6) Deformation measuring gauge: digital display dial gauge;

7) Deformation measurement range: 0 ~ 1.1mm;

8) Sample support span: 64mm, 100mm;

9) Maximum deformation measurement error: 0.01mm;

10) Heating medium: methyl silicone oil; (prepared by customers)

11) Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling;

12) Instrument size: 810mm × 470mm × 780mm

13) Space required: 0.5m front and back, 1.5m left and right

14) Power: 2500VA 220VAC 50HZ

Configuration

 1) 1 x Host

 2) 3 x Sample holder

 3) 3 x Hot deformation heads

 4) 3 x Vicat pinion

 5) 1 x Electric control box

 6) 3 x Digital display dial gauge

 8) 1 x Signal line

 9) 1 x Screw screwdriver

 10) 1 x Weight set

Remarks: Users need to have cooling water source and ventilation smoke exhaust equipment