English 
| Quantity: | |
|---|---|
Servo Motor Foam Pounding Dynamic Fatigue Test Machine For Lab
Overview:
Foam Pounding Dynamic Fatigue Test Machine is used to test foam fatigue by repeating indentation of a test piece by an indentor smaller in area than the test piece, the maximum load reached during each cycle being kept within specified limits. The machine can adjust the low platen automatically during testing to provide force compensation.
Specification:
1. The number of test cycles is 80,000 times, but the test cycle number of this instrument can reach 100,000 times, and it is equipped with an automatic adjustment device. Other specifications meet the QB/T 2819-2006 standard
2. Control method: touch screen control
3. Induction method: precision load cell
4. Test force value range: 0—200kg can be set
5. Unit switching: Kg, N, LB
6. Upper pressure plate: diameter 200mm, bottom rounded corner R1mm
7. Lower platform: 420×420mm, vent diameter 6mm, spacing 20mm
8. Maximum stroke: 200mm
9. Testing speed: 100±20mm/min
10. Range of test times: 1-999999 times, configurable
11. Power source: servo motor
12. Transmission mode: precision ball screw
13. Power supply: single-phase 220V, 50Hz/60Hz
14. Equipment weight: about 160kg
Servo Motor Foam Pounding Dynamic Fatigue Test Machine For Lab
Overview:
Foam Pounding Dynamic Fatigue Test Machine is used to test foam fatigue by repeating indentation of a test piece by an indentor smaller in area than the test piece, the maximum load reached during each cycle being kept within specified limits. The machine can adjust the low platen automatically during testing to provide force compensation.
Specification:
1. The number of test cycles is 80,000 times, but the test cycle number of this instrument can reach 100,000 times, and it is equipped with an automatic adjustment device. Other specifications meet the QB/T 2819-2006 standard
2. Control method: touch screen control
3. Induction method: precision load cell
4. Test force value range: 0—200kg can be set
5. Unit switching: Kg, N, LB
6. Upper pressure plate: diameter 200mm, bottom rounded corner R1mm
7. Lower platform: 420×420mm, vent diameter 6mm, spacing 20mm
8. Maximum stroke: 200mm
9. Testing speed: 100±20mm/min
10. Range of test times: 1-999999 times, configurable
11. Power source: servo motor
12. Transmission mode: precision ball screw
13. Power supply: single-phase 220V, 50Hz/60Hz
14. Equipment weight: about 160kg
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.