DH-LT-03 Micro-Leakage Non-Destructive Seal Tester,Vacuum Seal Testing Equipment, Sealing Strength Performance Testing Device
Introduction:
LT-03 Micro-Leakage Non-Destructive Seal Tester is developed according to the standard test
method of ASTM F2338-2013 Package Leakage - Vacuum Attenuation Method. It is specialized for all
kinds of empty/pre-filled syringes, water and powder bottles (glass/plastic), filling and capping bottles,
other hard packaging containers, electrical components and other samples of non-destructive positive.
| Leakage testing methods comparison |
| Water bath test | Comparison test | Micro-leakage detection |
| 10~20μm | The smallest aperture that can be detected | ＜2μm Dtectable |
| ＞30s | Testing time | Around s |
| Sensory tests, difficult to quantify | Display value management quantification | Leakage quantity and leak aperture |
| Poor repeatability | Value reproduction | Value reproduction available |
| Destructive test | Destructive/non-destructive | Non-destructive test |
| Water(requires maintenance) | Testing medium | Air |
| Small leakage, difficult to detect | Human error | Value management, no manual |
| Leakages can be located | Leaking point confirmation | Leaking point can’t be confirmed |
Parameters:
| Index | Parameters |
| Testing methods | Pressure differential vacuum, positive pressure attenuation |
| Testing system | Multi sensor technology |
| Vacuum range | 0~-100kpa/0~-14.5PSI/0~-1000mbar |
| Testing accuracy | 0.01CCM minimum（diameter around 1μm） |
| Testing unit | mbar/pa/psi |
| Testing time | 5-30s |
| Operation interface | 7-inch LCD touch screen |
| Vacuum resolution | 1pa/0.01mbar/0.0001psi |
| Data transfer | USB/485 communication |
| Data storage | Excel form |
| Administration | Three level administration |
| Security keys | Yes |
| Testing parameters storage | More than 600 groups of data（permanent storage） |
| Vacuum source | External electric vacuum pump |
| Testing results | By / not by automatic judgment |
| Testing standards | ASTM F2338 |
| Shell material | Engineering plastics, stainless steel |
| Size | 320×510×320mm |
| Power supply | 100-240VAC wide power |
| Air connection | φ6mm PU tube |
| Collection frequency | 50HZ |
| Printing configuration | Micro-printer(needle/heat sensitive optional)，A4 report can be saved and printed |
| Weights | Around 18kg |
| Fixture configuration | Manual fixture, automatic fixture |
| Testing configuration | Lab offline, sample test |
Standards:
ASTM F2338-13 Standard Test Method for Package Leakage - Vacuum Attenuation Method, SP1207 United States Pharmacopoeia Standard.
English
![HT-KL120 Table Type Rubber Mixing Machine [Electric Heating]Digital Open Rubber Mixer/Plastic Double Roll Mixer](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/loBpiKnllkSRqkjjinipio/tupian1-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating],Rubber Kneader Equipment HT-KL80](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/lnBpiKnllkSRqkjjinjoio/7_800-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating+Water Cooling]，Rubber Mixer Machine HT-KL120-EW](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/llBpiKnllkSRqkjjinoiio/tupian1-640-640.png)
