English 
| Quantity: | |
|---|---|
GB/T ASTM YBB Vacuum Sealing Perfomance Tester Touch Screen Sealing Tester
Introduction
LT-02P sealing tester is suitable for seal test of flexible packaging in food, pharmaceutical, daily chemical, electronics and other industries. The test can effectively compare and evaluate the sealing process and sealing performance of flexible packaging, and provide scientific basis for determining relevant technical indexes. It can also be used to test the sealing performance of the samples after the drop and pressure test. Compared with the traditional design, the intelligent test is realized: the preset of multiple test parameters can greatly improve the detection efficiency; the test mode of increasing pressure can be used to quickly obtain the sample leakage parameters and observe the creep, fracture and leakage of the sample under the stepped pressure environment and different holding time. Vacuum attenuation mode is suitable for automatic sealing detection of high value content packaging in vacuum environment. Printable parameters and test results (optional for printer).
Features
● Fully automatic test process with one click to complete the test
● Built-in high precision sensor, faster response
● Various modes available to meet the testing needs of different samples
● Multiple parameters presets for each mode, quick selection for testing
● Double air path design, more accurate test
● The number of test groups can be accumulated automatically, and the number of tests can be counted
● Optional needle printer can save and print test results
● Up to 500 test results can be saved with printing function (optional)
● Vacuum degree automatic maintenance and back-blowing unloading
● Super thick plexiglass vacuum chamber
● Configuration pressure regulating system, easy operation, easy maintenance
● Three level management authority (to be purchased separately)
● Gradient booster mode, more humanized
● Real-time stop, pressure holding time, higher accuracy
Parameter：
| Index | Parameter |
Vacuum | 0~90 Kpa |
Response speed | ＜5 ms |
Resolution | 0.01 Kpa |
| Sensor precision | ≤0.5class |
Built-in mode | Single point mode, increment mode |
Screen | 7-inch touch screen |
Pressure regulation range | 0.2-0.7 Mpa |
Interface size | Φ6 |
Pressure holding time | 0-999999 s |
| Vacuum chamber (other size customized) Φ270 mmx210 mm (H) ,Φ360 mmx585mm (H) ,Φ460 mmx330mm (H) | |
Equipment size | 420（L）X 300（B）X 165（H）mm |
Air source | Compressed air (supplied by user) |
Printer(optional) | Needle type |
Standards
YBB00052005-2015, GB/T 15171，GB/T27728-2011, GB 7544-2009, ASTM D3078, YBB00122002-2015
GB/T ASTM YBB Vacuum Sealing Perfomance Tester Touch Screen Sealing Tester
Introduction
LT-02P sealing tester is suitable for seal test of flexible packaging in food, pharmaceutical, daily chemical, electronics and other industries. The test can effectively compare and evaluate the sealing process and sealing performance of flexible packaging, and provide scientific basis for determining relevant technical indexes. It can also be used to test the sealing performance of the samples after the drop and pressure test. Compared with the traditional design, the intelligent test is realized: the preset of multiple test parameters can greatly improve the detection efficiency; the test mode of increasing pressure can be used to quickly obtain the sample leakage parameters and observe the creep, fracture and leakage of the sample under the stepped pressure environment and different holding time. Vacuum attenuation mode is suitable for automatic sealing detection of high value content packaging in vacuum environment. Printable parameters and test results (optional for printer).
Features
● Fully automatic test process with one click to complete the test
● Built-in high precision sensor, faster response
● Various modes available to meet the testing needs of different samples
● Multiple parameters presets for each mode, quick selection for testing
● Double air path design, more accurate test
● The number of test groups can be accumulated automatically, and the number of tests can be counted
● Optional needle printer can save and print test results
● Up to 500 test results can be saved with printing function (optional)
● Vacuum degree automatic maintenance and back-blowing unloading
● Super thick plexiglass vacuum chamber
● Configuration pressure regulating system, easy operation, easy maintenance
● Three level management authority (to be purchased separately)
● Gradient booster mode, more humanized
● Real-time stop, pressure holding time, higher accuracy
Parameter：
| Index | Parameter |
Vacuum | 0~90 Kpa |
Response speed | ＜5 ms |
Resolution | 0.01 Kpa |
| Sensor precision | ≤0.5class |
Built-in mode | Single point mode, increment mode |
Screen | 7-inch touch screen |
Pressure regulation range | 0.2-0.7 Mpa |
Interface size | Φ6 |
Pressure holding time | 0-999999 s |
| Vacuum chamber (other size customized) Φ270 mmx210 mm (H) ,Φ360 mmx585mm (H) ,Φ460 mmx330mm (H) | |
Equipment size | 420（L）X 300（B）X 165（H）mm |
Air source | Compressed air (supplied by user) |
Printer(optional) | Needle type |
Standards
YBB00052005-2015, GB/T 15171，GB/T27728-2011, GB 7544-2009, ASTM D3078, YBB00122002-2015
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.