//contact //product
You are here: Home » Products » Environmental Testing Chamber » Organic Film Salt Spray Test Chamber 108L/270L/600L/700L/1000L Volume

Product Detail

Organic Film Salt Spray Test Chamber 108L/270L/600L/700L/1000L Volume Organic Film Salt Spray Test Chamber 108L/270L/600L/700L/1000L Volume


Organic Film Salt Spray Test Chamber 108L/270L/600L/700L/1000L Volume

Share to:
sharethis sharing button
Power:AC220V 50HZ 15A;AC220V 50HZ 20A
Temperature accuracy:±1°C
  • DHL-90

  • Dahometer

  • 1 set

  • 5-7 days

  • 1 years,Lifelong maintenance

  • TT/Western Union/Paypal etc

  • Negotiable


Organic Film Salt Spray Test Chamber 108L/270L/600L/700L/1000L Volume

Through the assessment of the salt spray corrosion ability of materials and their protective layers, and the comparison of the process quality of similar protective layers, the ability of certain products to resist salt spray corrosion can be assessed; the product is suitable for the protection of parts, electronic components, and metal materials Salt spray corrosion test of layers and industrial products


CNS3627,3885,4159,7669,8886,JISD-0201,H-8502,H-8610,K-5400,Z-2371,ISO 3768,3769,3770,ASTMB-117,B-268,GB-T2423,GJB 150



1:5MM imported gray and white impact resistant P.V.C board, high temperature resistance up to 85°C, corrosion resistance.

2:Support shelf:φ10MM glass fiber rod, corrosion resistance.Plastic-steel V-shaped brackets and fiber rods is placed at an angle to ensure that the test object is inclined at 15-30 degrees.

3:Pressure bucket adopts seamless welding by 2.0MM SUS304 stainless steel plate.

4:Using titanium alloy heating tube for heat generation, long service life, high corrosion resistance.

5:The cover is made up of 5MM imported transparent (Germany YLIS) acrylic board. Fine workmanship, beautiful appearance, high transparency.















Interior dimensions(mm)L*W*H






Exterior dimensions(mm)L*W*H






Control system

1.Adopt Japan IEC high-speed CPU, stable performance, safety and reliability

2.LED digital tube displaying, humanization interface, all information is clear at a glance.

3.Multi-fault warning protection system, anti-dry heating, anti-overheating

4.High-power SSR output, imported sterling silver relay contacts, with a service life to 106.

5.Multiple time modes, SMH can be switched as required.

6.Multi-control mode for continuous/discontinuous/manual/automatic testing.

7.With manual/automatic demist mode to ensure that the salt mist can’t be leaked, so as to avoid corrosion of the laboratory.

8.Hidden correction method to ensure absolute temperature is under control.


Replenishing system

Automatic/manual water charging system, with the function of automatic/manual replenishment when the water level is insufficient. The experiment will be not interrupted which can be met the diverse environmental requirements for users (Automatic water replenishment only needs to be connected with water pipe).

Heating mode

Direct steam heating.it has the feature of quick heating speed, uniform temperature distribution, and less stand-by time.

Controlling mode

Touch controlling standard operation. With full detection fault pre-warning system. Lights up when fault occurs. Built-in manual defogging function, can be placed or viewed during the experiment to remove the experimental accumulation of salt spray.

Safety protection device

With double over-temperature protection (Italian KGB), the heating power can be switched off automatically in the event of temperature control meter fault or a heating system fault. Avoid overheating damage on the instrument.

Double low water level protection to prevent dry burning damage on the heat pipe of laboratory and pressure bucket

With overload short circuit protection. To prevent damage on the instrument and internal electronic control accessories when an exception occurs. (Equip the low salt level warning of the brine bucket when doing experiment to avoid experimental abnormalities after the brine is finished)

Dosage barrel

Built-in fog collection bucket. Compared to the traditional external type, it is less likely to be damaged.


Precision quartz glass nozzle. Using 4000 hours without crystallizing can be guaranteed.The spray tower is equipped with a conical dispersive device, which has the functions of guiding fog, adjusting the amount of fog, and evenly falling fog.

Sealing method

The inside and outside box is connected to the sealing groove, using water sealing. avoid salt spray leakage.

Temperature range

1: Laboratory temperature: 35°C--50°C (can be set arbitrarily)

2: Pressure bucket temperature:47°C--63°C (can be set arbitrarily)

Heating rate

1: Laboratory, room temperature---→35°C     about 35 minutes

2:Pressure bucket, room temperature----→47°C  about 15 minutes

Temperature accuracy



60/90 model AC220V 50HZ 15A     120 and more models AC220V 50HZ 20A

This machine is suitable for neutral salt spray test (NSS) and corrosion test (AASSCASS)



Related Products

About Us

Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.

Contact Us
   Contact:Julie Zhong
   Mobile/WhatsApp:+86 13267004347
  Address:No. 2-1, Xinya Road, The Third Industrial Park, Dalingya Village, Daojiao Town, DongGuan, GuangDong, CN
Copyright  2021 Guangdong Hongtuo Instrument Technology Co.,Ltd Technology by www.leadong.com