English 
| Quantity: | |
|---|---|
Printing Ink Interfacial Tension Apparatus Liquid Interfacial Tension Tester
The fully automatic interfacial tensiometer is based on the ring method (platinum ring method) to measure the surface tension of various liquids (liquid-gas phase interface) and the interfacial tension of liquids (liquid-liquid phase interface). This method is simple to operate and highly efficient, and is widely used in electric power, petroleum, chemical industry, ink, electroplating, pesticide, fire protection, cosmetics and other industries.
Complied Standards:
GB6541-1986 "Petroleum Products-- Determination of Oil Water Interface Tension by Ring Method"
ISO 6295-1983 "Petroleum Products, Mineral Oil,Lube Oil--Determination of Interface Tension by Ring Method"
JB/T 9388-1997 " Technical Conditions of Interface Tension Tester"
ISO1409-1995 "Plastic, Rubber, Polymer Dispersion and Latex--Determination of Surface Tension”
SH/T1156-92 "Synthetic rubber latex -- Determination of Surface Tension."
GB/T 5549ISO 304-1985 "Surfactant--Determination of Surface Tension by drawing up Liquid Membrane Method "
ISO 4311-1979 "Anionic and Nonionic Surfactant--Determination of Surface Tension by Ring Method" and other requirements.
GB/T 22237-2008 “Surfactant--Determination of Surface Tension”
JB/T 18396-2001 “Natural latex--Determination of Surface Tension by Ring Method”
and standards like ISO14090-82, ASTM, EN14370, ZB2025-93, D1417 GB2960-82 etc.
Application:
Ink,printing ink,oil paint industry:analyzing the wettability in printing and coating.
Cleaning agent industry:analyzing the absorbing rate,property and a suitable concentration of any surface activating agent.
Cosmetic industry:analyzing the dispersibility,stability and wettability of any emulsion or suspending agent.
Electroplating industry:analyzing the surface tension of any electroplating solution for quality control.
Pesticide industry:preparing any additive agent and analyzing the wettability.
Petroleum industry and auxiliary agent industry.,etc.
Main Technical Parameters:
Model | DH-ZY-1 | DH-ZY-2 | DH-ZY-3 |
Measuring range | 0-600mN/m | 0-400mN/m | 0-200mN/m |
Sensitivity | 0.1mN/m | 0.01mN/m | 0.001mN/m |
Repeatability | ±0.1mN/m | ±0.01mN/m | ±0.02mN/m |
Measuring mode | Pt board method,Pt loop method,or both | ||
Operating mode | Sample stage automatic lifting,Fully automatic measurement | ||
Data displaying | Surface/Interface tension(Pt board method,displaying data directly | ||
Maximum force(Pt loop method,secondary calculation is necessary | |||
Displaying mode | Wide visual angle backlight LCD,digital displaying | ||
Samle constant temperature range | Standard room temperature or 5℃ to 90℃,(Need to choose the sample constant jacket cup and constant temperature circular bath | ||
Measuring time | Low concentration sample:3 to 5 seconds for Pt board method,40 to 60 seconds for Pt loop method | ||
Data output interface | RS-232 | ||
External dimension | 400*200*430mm (L*W*H) | ||
Net weight | 13kg | ||
Power supply | 220V,50Hz | ||
Printing Ink Interfacial Tension Apparatus Liquid Interfacial Tension Tester
The fully automatic interfacial tensiometer is based on the ring method (platinum ring method) to measure the surface tension of various liquids (liquid-gas phase interface) and the interfacial tension of liquids (liquid-liquid phase interface). This method is simple to operate and highly efficient, and is widely used in electric power, petroleum, chemical industry, ink, electroplating, pesticide, fire protection, cosmetics and other industries.
Complied Standards:
GB6541-1986 "Petroleum Products-- Determination of Oil Water Interface Tension by Ring Method"
ISO 6295-1983 "Petroleum Products, Mineral Oil,Lube Oil--Determination of Interface Tension by Ring Method"
JB/T 9388-1997 " Technical Conditions of Interface Tension Tester"
ISO1409-1995 "Plastic, Rubber, Polymer Dispersion and Latex--Determination of Surface Tension”
SH/T1156-92 "Synthetic rubber latex -- Determination of Surface Tension."
GB/T 5549ISO 304-1985 "Surfactant--Determination of Surface Tension by drawing up Liquid Membrane Method "
ISO 4311-1979 "Anionic and Nonionic Surfactant--Determination of Surface Tension by Ring Method" and other requirements.
GB/T 22237-2008 “Surfactant--Determination of Surface Tension”
JB/T 18396-2001 “Natural latex--Determination of Surface Tension by Ring Method”
and standards like ISO14090-82, ASTM, EN14370, ZB2025-93, D1417 GB2960-82 etc.
Application:
Ink,printing ink,oil paint industry:analyzing the wettability in printing and coating.
Cleaning agent industry:analyzing the absorbing rate,property and a suitable concentration of any surface activating agent.
Cosmetic industry:analyzing the dispersibility,stability and wettability of any emulsion or suspending agent.
Electroplating industry:analyzing the surface tension of any electroplating solution for quality control.
Pesticide industry:preparing any additive agent and analyzing the wettability.
Petroleum industry and auxiliary agent industry.,etc.
Main Technical Parameters:
Model | DH-ZY-1 | DH-ZY-2 | DH-ZY-3 |
Measuring range | 0-600mN/m | 0-400mN/m | 0-200mN/m |
Sensitivity | 0.1mN/m | 0.01mN/m | 0.001mN/m |
Repeatability | ±0.1mN/m | ±0.01mN/m | ±0.02mN/m |
Measuring mode | Pt board method,Pt loop method,or both | ||
Operating mode | Sample stage automatic lifting,Fully automatic measurement | ||
Data displaying | Surface/Interface tension(Pt board method,displaying data directly | ||
Maximum force(Pt loop method,secondary calculation is necessary | |||
Displaying mode | Wide visual angle backlight LCD,digital displaying | ||
Samle constant temperature range | Standard room temperature or 5℃ to 90℃,(Need to choose the sample constant jacket cup and constant temperature circular bath | ||
Measuring time | Low concentration sample:3 to 5 seconds for Pt board method,40 to 60 seconds for Pt loop method | ||
Data output interface | RS-232 | ||
External dimension | 400*200*430mm (L*W*H) | ||
Net weight | 13kg | ||
Power supply | 220V,50Hz | ||
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.