Single-Arm Drop Test Machine Drop Weight Impact Testing Machine For Lab

Single-Arm Drop Test Machine Drop Weight Impact Testing Machine For Lab

This machine is specially designed to test the product's damage caused by falling and evaluate the impact strength during transportation and transportation. Applicable standard: ISO2248 JISZ0202-87 GB / T4857.5-92.

Features:

The single-arm drop test machine can perform free drop test on the face, angle and edge of the package. It is equipped with a digital display height indicator and uses a decoder for height tracking, so that it can accurately give the product drop height and the preset drop height.The error does not exceed 2% or 10MM. This machine adopts single-arm double-column structure, with electric reset, electric control drop and electric lifting device, easy to use; the unique buffer device greatly improves the service life, stability and safety of the machine. Single arm setting, can easily place the product.

Technical parameters:

1. Drop height mm: 300-1500 adjustable

2. The maximum weight of the test piece kg: 80Kg;

3. Thickness of bottom plate: 10mm (solid iron plate)

4. Maximum size of test piece mm: 1000 x1000 x 800

5. Impact panel size mm: 1700 x 1200 x10

6. Drop height error: ± 10mm

7. Overall dimensions of test bench mm: about 1700 x 1200 x 2315

8. Support arm size: 180 * 180 * 10mm

9. Net weight kg: about 300kg;

10. Test method: face, angle and edge drop in all directions

11. Control mode: electric

12. Falling height error: 1%

13. Parallel error of impact panel: ≤1 degree

14. The angle error between the falling surface and the horizontal during the falling process: ≤1 degree

15. Power supply: 380V1, power supply: AC380V 50HZ

16. Power: 1.85KWA

Environment requirements:

Temperature: 5 ℃ ～ + 28 ℃ (average temperature ≤28 ℃ within 24 hours)

Relative humidity: ≤85% RH

Power supply conditions: three-phase four-wire + protective earth,

Voltage range: AC (380 ± 38) V