English 
| Quantity: | |
|---|---|
Touch Screen Tensile And Compression Testing Machine UTM Tensile
Application：
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.
Standard:
ASTM, ISO, DIN, GB and other international standards.
Application products:
》Plastic 》Film 》Fiber and thin wire 》Adhesive 》Foam material | 》Elastomer 》Connector 》Biomaterials 》Wood and paper products 》Metal foil 》Metallic line
| 》Below medium strength metal 》Oil bearing 》Part 》Fastener 》Composite material |
Technical Instruction:
Brand | HongTuo | |||||||||
Model | WDW-S | |||||||||
-005 | -01 | -02 | -05 | -1 | -2 | -5 | -10 | |||
Capacity | KN | 0.05kN | 0.1 kN | 0.2 kN | 0.5kN | 1 kN | 2kN | 5kN | 10KN | |
KG | 5kg | 10kg | 20kg | 50kg | 100kg | 200kg | 500kg | 1000kg | ||
lb | ||||||||||
Structure | Double rail structure | Three double rail structure | ||||||||
Unit switching | G、Kg、lb、N、KN | |||||||||
Displacement unit switching | Inch cm mm | |||||||||
Test machine level | 1class | |||||||||
Effective force range | 0.4％～100％FS | |||||||||
Force accuracy | Within ±0.5% | |||||||||
Force decomposition | 1/200 000 | |||||||||
Force Power magnification | X1,X2,X5,X10,X20,X50,X100.,etc.Seven-speed automatic shifting | |||||||||
Displacement resolution | 0.05mm | |||||||||
Displacement accuracy | Within ±1% | |||||||||
Deformation measurement range | 2%～100%FS | |||||||||
Deformation indication accuracy | Within ±1% | |||||||||
Large deformation measurement range | (0～800)mm | |||||||||
Large deformation resolution | 0.05mm | |||||||||
Large deformation indication error limit | Within ±1% | |||||||||
Maximum test speed | 500mm/min；optional maximum 1000mm/min | |||||||||
Minimum test speed | 0.1mm/min | |||||||||
Speed accuracy | Within ±1% | |||||||||
Beam travel Measuring height | standard | No grip testing stroke：920mm；With grip testing stroke：320mm | ||||||||
optional | No grip testing stroke：1320mm；With grip testing stroke：320mm | |||||||||
Fixture configuration | One set of tensile grip；can choose other grips | |||||||||
Returning method | Manual or automatic selection, automatically return after the test ends or manually return to the initial position | |||||||||
Stop method | 1.Maximum break value automatically stop 2.Upper and lower limit safety setting stop | |||||||||
Safety devices | 1.Mechanical limit switch protection 2.Emergency stop switch emergency brake | |||||||||
Overload protection | Over 10% of maximum load, automatic machine protection | |||||||||
Accessories | 1 power cord; 1 test software program CD; 1 data cable; 1 manual; 1 certificate | |||||||||
Optional accessories | Anti-splash device (protective door); printer | |||||||||
Powder supply | 220V.AC/ 50HZ; 110V.AC/60HZ | |||||||||
Main host size/ weight | Standard model:Length*Width*Height:450mm*400mm*1160mm / Around 50KG Heightening model:Length*Width*Height:450mm*400mm*1550mm / Around 55KG | |||||||||
Packing size / weight | Standard model:Length*Width*Height:550mm*500mm*1400mm / Around 73KG Heightening model:Length*Width*Height:550mm*500mm*1800mm / Around 78KG | |||||||||
Touch Screen Tensile And Compression Testing Machine UTM Tensile
Application：
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.
Standard:
ASTM, ISO, DIN, GB and other international standards.
Application products:
》Plastic 》Film 》Fiber and thin wire 》Adhesive 》Foam material | 》Elastomer 》Connector 》Biomaterials 》Wood and paper products 》Metal foil 》Metallic line
| 》Below medium strength metal 》Oil bearing 》Part 》Fastener 》Composite material |
Technical Instruction:
Brand | HongTuo | |||||||||
Model | WDW-S | |||||||||
-005 | -01 | -02 | -05 | -1 | -2 | -5 | -10 | |||
Capacity | KN | 0.05kN | 0.1 kN | 0.2 kN | 0.5kN | 1 kN | 2kN | 5kN | 10KN | |
KG | 5kg | 10kg | 20kg | 50kg | 100kg | 200kg | 500kg | 1000kg | ||
lb | ||||||||||
Structure | Double rail structure | Three double rail structure | ||||||||
Unit switching | G、Kg、lb、N、KN | |||||||||
Displacement unit switching | Inch cm mm | |||||||||
Test machine level | 1class | |||||||||
Effective force range | 0.4％～100％FS | |||||||||
Force accuracy | Within ±0.5% | |||||||||
Force decomposition | 1/200 000 | |||||||||
Force Power magnification | X1,X2,X5,X10,X20,X50,X100.,etc.Seven-speed automatic shifting | |||||||||
Displacement resolution | 0.05mm | |||||||||
Displacement accuracy | Within ±1% | |||||||||
Deformation measurement range | 2%～100%FS | |||||||||
Deformation indication accuracy | Within ±1% | |||||||||
Large deformation measurement range | (0～800)mm | |||||||||
Large deformation resolution | 0.05mm | |||||||||
Large deformation indication error limit | Within ±1% | |||||||||
Maximum test speed | 500mm/min；optional maximum 1000mm/min | |||||||||
Minimum test speed | 0.1mm/min | |||||||||
Speed accuracy | Within ±1% | |||||||||
Beam travel Measuring height | standard | No grip testing stroke：920mm；With grip testing stroke：320mm | ||||||||
optional | No grip testing stroke：1320mm；With grip testing stroke：320mm | |||||||||
Fixture configuration | One set of tensile grip；can choose other grips | |||||||||
Returning method | Manual or automatic selection, automatically return after the test ends or manually return to the initial position | |||||||||
Stop method | 1.Maximum break value automatically stop 2.Upper and lower limit safety setting stop | |||||||||
Safety devices | 1.Mechanical limit switch protection 2.Emergency stop switch emergency brake | |||||||||
Overload protection | Over 10% of maximum load, automatic machine protection | |||||||||
Accessories | 1 power cord; 1 test software program CD; 1 data cable; 1 manual; 1 certificate | |||||||||
Optional accessories | Anti-splash device (protective door); printer | |||||||||
Powder supply | 220V.AC/ 50HZ; 110V.AC/60HZ | |||||||||
Main host size/ weight | Standard model:Length*Width*Height:450mm*400mm*1160mm / Around 50KG Heightening model:Length*Width*Height:450mm*400mm*1550mm / Around 55KG | |||||||||
Packing size / weight | Standard model:Length*Width*Height:550mm*500mm*1400mm / Around 73KG Heightening model:Length*Width*Height:550mm*500mm*1800mm / Around 78KG | |||||||||
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.