3 Station Heat Distortion HDT Tester With Computer Control

3 Station Heat Distortion HDT Tester With Computer Control

Application:

Vicat Thermal Deformation Tester used to measure plastic, rubber, nylon, cable …

macro molecule material thermal deformation temperature and vi cat softening temperature, the main sensor, element with highquality, high reliability, security, the sample frame has the function of automatic up and down, simultaneity equip power test software system function mightiness, is a suit of special software of thermal deformation temperature, vi cat softening point temperature test.

Standards:

GB/T 1633、GB/T 1634、GB/T 8802、ISO 2507、ISO 75、ISO 306、ASTMD 1525,ASTMD 648

Specification:

1) Temperature control range: room temperature to 300 ° C

2) Maximum temperature error: ±0.5°C

3) Heating rate: 50 ° C / h, 120 ° C / h

4) Temperature measurement point: 1

5) Deformation measurement range: -0.1mm~1.1mm

6) Maximum deformation error: ±0.01mm

7) Using medium: methyl silicone oil (customer-supplied);

8) Sample support span: 64mm, 100mm

9) Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling;

10) Has an upper limit temperature protection function;

11) Number of test stands: 3

12) The control mode adopts the single-chip computer and PC distributed control system;

13) Instrument size: 880mm × 580mm × 1400mm

14) Space required: 1m before and after, 0.6m left and right

15) Power supply: 4500VA 220VAC 50HZ

Configuration:

1) 1 x Host

2) 3 x sample holders

3) 3x Hot deformation head

4) 3 x Vicat pinion

5) 1 x Brand desktop computer

6) 1 x Color inkjet printer

7) 1 x Power cord

8) 1 x Signal line

Remarks: Users need to have cooling water source and ventilation smoke exhaust equipment