//contact //product
You are here: Home » Products » Plastic Testing Equipment » DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument

Product Detail

DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument
DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument

loading

DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument

Share to:
sharethis sharing button
Heating power: 3.0kw
Fuel tank volume: about 25L
The weight of the load bar and the tray: 76g
Deformation measurement range: 0-10mm
  • DH-300B-6

  • Dahometer

  • 1 set

  • 5-7 days

  • 1 year

  • T/T, Western Union,PayPal,Payoneer...

  • Negotiable

Availability:
Quantity:

DH-300B-6 Thermal Deformation, Vicat Softening Point Temperature Tester, Bench Type Vicat Instrument

Application:

This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature.

Standards:

GB/T1633 "Determination of vicat softening temperature (VST) of thermoplastics"

GB/T1634 "Determination of plastic load deflection temperature part 1: general test method"

GB/T8802 "Determination of softening temperature of plastic pipe fittings"

Equals to ISO2507-1:2017

IS075-2013 "Determination of plastic load deformation temperature"

ASTM D 648 "Plastic heat deflection temperature test method"

ASTM D 1525 "Plastic vicat softening temperature test method"

Advantages:

1.Intelligent PID adjustment, accurate heating rate, precise temperature control

2.Can do thermal deformation test of various standard specimen

3.Can do Vicat softening point test of various standard specimen

4.The required load can be automatically calculated according to the test standard and sample size

5.Two heating rates can be selected, free switching, simple operation

6.When the test is completed or the temperature exceeds the upper limit, the temperature control will be turned off and shut down automatically

7.With software over-temperature protection and leakage protection

8.Has air-cooled and water-cooled dual rapid cooling

Specification:

1). Temperature control range: ambient temperature~300℃

2). Heating rate: (120±10)℃/h (12±1)℃/6min

                (50±5)℃/h (5±0.5)℃/6min

3). Temperature indication error: 0.1℃

4). Temperature control accuracy: ±0.5℃

5). Maximum deformation indication error: ±0.001mm

6). Deformation measurement range: 0-10mm

7). Number of sample racks: 6

8). The weight of the load bar and the tray: 76g

9). Test span range: 64 or 100mm according to the standard

10). Fuel tank volume: about 25L

11). Heating medium: methyl silicone oil

12). Cooling method: external water cooling

13). Heating power: 3.0kw

 

Configuration

1) 1x host

2) 6 x sample holders

3). 6 x heat deformation indenters

4). 6 x Vicat needles

5). 6 x sets of weights (including boxed weights) (attached table)

6). 1x power socket

Attached table: (accept non-standard customization)

   

The number of weights in one set, 6 sets in total:

Weights

Qty

Weights

Qty

1g

1

100g

1

2g

2

200g

2

5g

1

500g

1

10g

1

1000g

1

20g

2

2000g

2

50g

1




Previous: 
Next: 

Related Products

About Us

Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.

Contact Us
​​​​​​​​​​​​​​ 
   Contact:Julie Zhong
   Tel:+86-0769-22403424
   Mobile/WhatsApp:+86 13267004347
  Email:sales03@hongtuo.com.cn
  Address:No. 2-1, Xinya Road, The Third Industrial Park, Dalingya Village, Daojiao Town, DongGuan, GuangDong, CN
Copyright  2021 Guangdong Hongtuo Instrument Technology Co.,Ltd Technology by www.leadong.com