English 
| Quantity: | |
|---|---|
Digital Displaying 5.5J Izod And Charpy Impact Test GB1843-80 ISO180-82
Application:
This impact tester is used to test impact toughness of hard plastic,GFPA,glass fiber reinforced plastics,ceramics, cast stone,electrical insulating materialand other non-metal material.It's a ideal testing equipments in chemical industry,R&D institution,quality controlling dept.
Features:
1. The electronic impact testing machine adopts the circular grating angle measuring technology.
2. It has the characteristics of high precision, good stability and large measuring range. 3.Digital Displaying the value of impact strength, pre-elevation angle, rising angle, and average value.
4.It has the function of automatic correction of energy loss, printing test report, etc.
5.The new material carbon brazing is used to make the swing arm, which is stronger than steel and lighter than aluminum.
Standards:
Comply with ISO179-92, GB1043-93, JB/T 8762-1998, JB/T8761-1998 standards
Specification:
Model | HT-5D-CM | HT-25D-CM | HT-50D-CM |
Pendulum energy | 1J、2J、2.75J、4J、 5.5J | 11J、22J、25J | 22J、50J |
Impact speed | 2.9 m/s ,3.5m/s | ||
Pendulum | 150° | ||
The distance of pendulum center to impact blade | 221mm/335m/380mm | ||
The distance of impact blade to clamp upper flat | 22mm、40mm、60mm、70mm、95mm | ||
Blade radius | R=0.8mm、 R=2mm | ||
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
Digital Displaying 5.5J Izod And Charpy Impact Test GB1843-80 ISO180-82
Application:
This impact tester is used to test impact toughness of hard plastic,GFPA,glass fiber reinforced plastics,ceramics, cast stone,electrical insulating materialand other non-metal material.It's a ideal testing equipments in chemical industry,R&D institution,quality controlling dept.
Features:
1. The electronic impact testing machine adopts the circular grating angle measuring technology.
2. It has the characteristics of high precision, good stability and large measuring range. 3.Digital Displaying the value of impact strength, pre-elevation angle, rising angle, and average value.
4.It has the function of automatic correction of energy loss, printing test report, etc.
5.The new material carbon brazing is used to make the swing arm, which is stronger than steel and lighter than aluminum.
Standards:
Comply with ISO179-92, GB1043-93, JB/T 8762-1998, JB/T8761-1998 standards
Specification:
Model | HT-5D-CM | HT-25D-CM | HT-50D-CM |
Pendulum energy | 1J、2J、2.75J、4J、 5.5J | 11J、22J、25J | 22J、50J |
Impact speed | 2.9 m/s ,3.5m/s | ||
Pendulum | 150° | ||
The distance of pendulum center to impact blade | 221mm/335m/380mm | ||
The distance of impact blade to clamp upper flat | 22mm、40mm、60mm、70mm、95mm | ||
Blade radius | R=0.8mm、 R=2mm | ||
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
![HT-KL120 Table Type Rubber Mixing Machine [Electric Heating]Digital Open Rubber Mixer/Plastic Double Roll Mixer](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/loBpiKnllkSRqkjjinipio/tupian1-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating],Rubber Kneader Equipment HT-KL80](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/lnBpiKnllkSRqkjjinjoio/7_800-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating+Water Cooling]，Rubber Mixer Machine HT-KL120-EW](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/llBpiKnllkSRqkjjinoiio/tupian1-640-640.png)
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.