//contact //product
You are here: Home » Products » Plastic Testing Equipment » IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester

Product Detail

IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester
IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester


IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester

Share to:
sharethis sharing button
Standards:IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005
Burning time: 0-999.9s ± 0.1s adjustable
Holding time: 0-999.9s ± 0.1s
Flame height: 12mm ± 1mm
  • HT-5169T-N

  • Dahometer

  • 1 set

  • 5-7 days

  • 1 years,Lifelong maintenance

  • TT/Western Union/Paypal etc

  • Negotiable


IEC60695 -11-5, GB/T5169.5-2008 Needle Flame Flammability Tester

Model: HT-5169T-N


Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts.

The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques. For small parts (or components) Glow-wire test or horizontal-vertical combustion test method is not suitable, can be cited needle flame test method. If the test sample is ignited during the glow-wire test, the resulting combustion hazard is subject to a needle-flame test. Needle flame tester for electrical and electronic products, household appliances parts, components and components, such as:

wiring board, centrifugal switch, rice cooker socket ...



IEC 60695-2-2: 1991 (Second Edition), Amendment No. 1 of IEC 60695-2-2 (1994-03), IEC60695 -11-5, GB/T 5169.5-2008, GB4706.1-2005 The simulated test project specified by the standard.



1.Needle burner: inner hole Φ 0.5mm ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥ 35mm, stainless steel

2.Burner angle: tilt 45 ° (test) or vertical (when adjusting the flame height)

3.Burning time: 0-999.9s ± 0.1s adjustable (usually 30s)

4.Holding time: 0-999.9s ± 0.1s, automatic recording, manual suspension

5.Flame height: 12mm ± 1mm (with height measuring instruments)

6.The gas body: 95% butane gas (can use bottled lighter gas)

7.Temperature test range: 0~1000 °C

8.Flame temperature requirements: from 100 ° C ± 2 ° C to 700 ° C ± 3 ° C time within 23.5 seconds ± 1 second

9.Temperature thermocouple: Φ0.5mm imported armored (K type) thermocouple

10.Needle flame burning tester test background: black background

11.Test process: automatic control of test procedures, independent ventilation

12.Reference standard: IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005

13.The studio volume: 0.5 cubic (can be customized according to customer requirements 0.75 cubic or 1 cubic)

14.The outer dimensions of the equipment: 1000mm wide × 650mm deep × 1300mm high

Shipping Attention:

1.Please contact us after you place order.

2.Normally orders will be shipped out around 5 working days once payment received. for custom made parts.needs to be negotiated.

3.We Will ship by DHL, FedEx, UPS, EMS( we will choose the best way to ship the items ASAP). You will be updated the tracking number via Aliexpress. Generally, it takes 3-7 delivery days to your shipping address.Please make sure the phone number is valid.

Company information:

The ability to serve and service station is the mirror to show strength of brand. as well it is the visible tool to support customers. Daho Meter pay much attention to the training staff about technology to make sure customers would get the reliable products and service. also ensure the ability to get through the whole process, such as technical consultation, business handling, installation and debugging, after-sales service., etc. Daho Meter set up 4 different customer service center around in China, they are located respectively in Dongguan, ShenZhen, BeiJing, and HangZhou. In Dongguan, we built the Testing Center in Aug.2013.All in all, what we did is to make improvement on quality service to meet all kinds of customers’demands.

As the pursue for excellent quality and considerate service, Daho Meter’s brand is getting stronger and stronger step by step through serve customers beyond their expectation. Gradually market speak well of this brand. and finally customers place dependence on it. With this kind of help, Daho Meter advance in the forefront of the density filed.

Future depends on where we stand, innovation can make dream came true. the goal Daho Meter is about to hit is to become the global leader of densimeter brand. we will stick on the professional road, keep the pragmatic and pioneering spirit,to provide support to improve analyzing testing precision for all industries and make contribute to sustainable development for society, also make our pygmy effort for “China's Dream”as well


Related Products

About Us

Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.

Contact Us
   Contact:Julie Zhong
   Mobile/WhatsApp:+86 13267004347
  Address:No. 2-1, Xinya Road, The Third Industrial Park, Dalingya Village, Daojiao Town, DongGuan, GuangDong, CN
Copyright  2021 Guangdong Hongtuo Instrument Technology Co.,Ltd Technology by www.leadong.com