English 
| Quantity: | |
|---|---|
JB/T8761-1998 Izod Charpy Impact Testing Machine For Plastic Material
Application:
The cantilever beam impact tester is used to measure the impact toughness of non-metallic materials such as plastic, reinforced nylon, fiberglass, ceramics, cast stone, plastic electrical appliances, and insulating materials. It is a common equipment for quality inspection by scientific research institution, universities and non-metallic materials manufacturers. It has the feature of simple structure, easy operation and high test accuracy.
Features:
1. The electronic impact testing machine adopts the circular grating angle measuring technology.
2. It has the characteristics of high precision, good stability and large measuring range. 3.Digital Displaying the value of impact strength, pre-elevation angle, rising angle, and average value.
4.It has the function of automatic correction of energy loss, printing test report, etc.
5.The new material carbon brazing is used to make the swing arm, which is stronger than steel and lighter than aluminum.
Standards:
Comply with ISO179-92, GB1043-93, JB/T 8762-1998, JB/T8761-1998 standards
Specification:
Model | HT-5D-CM | HT-50D-CM | HT-5-50D-CM |
Izod pendulum energy | 1J, 2.75J, 5.5J | 11J, 22J | 1J, 2.75J, 5.5J, 11J, 22J |
Charpy pendulum energy | 1J, 2J, 4J, 5J | 7.5J, 15J, 25J, 50J | 1J, 2J, 4J, 5J, 7.5J, 15J, 25J, 50J |
Charpy impact speed | 2.9m/s | 3.8m/s | 2.9m/s(≤5J), 3.8m/s(≥7.5J) |
Charpy pendulum center distance | 230mm | 395mm | 230mm(≤5J), 395mm(≥7.5J) |
Izod impact speed | 3.5m/s | ||
Izod pendulum center distance | 335mm | ||
Pendulum angle | 150° | ||
Measurement accuracy | ±0.1% | ||
Resolution | 0.03% | ||
The distance from the izod impact blade to the upper plane of the jaw | 22mm±0.2mm | ||
Izod edge fillet radius | R=0.8mm | ||
Charpy impact edge fillet radius | R=2mm±0.5mm | ||
Charpy impact blade angle | 30°±1° | ||
Charpy impact edge fillet radius | R=1mm±0.1mm | ||
Charpy impact support front angle | 5° | ||
Charpy impact support rear angle | 10° | ||
Output mode | Printout or U-disk output | ||
Supply voltage | 110~230VAC 50/60Hz | ||
Appearance size (L*W*H) | 85cm*37cm*65cm | 106cm*37cm*78cm | 106cm*37cm*78cm |
Weight | About 80kg | About 100kg | About 120kg |
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
JB/T8761-1998 Izod Charpy Impact Testing Machine For Plastic Material
Application:
The cantilever beam impact tester is used to measure the impact toughness of non-metallic materials such as plastic, reinforced nylon, fiberglass, ceramics, cast stone, plastic electrical appliances, and insulating materials. It is a common equipment for quality inspection by scientific research institution, universities and non-metallic materials manufacturers. It has the feature of simple structure, easy operation and high test accuracy.
Features:
1. The electronic impact testing machine adopts the circular grating angle measuring technology.
2. It has the characteristics of high precision, good stability and large measuring range. 3.Digital Displaying the value of impact strength, pre-elevation angle, rising angle, and average value.
4.It has the function of automatic correction of energy loss, printing test report, etc.
5.The new material carbon brazing is used to make the swing arm, which is stronger than steel and lighter than aluminum.
Standards:
Comply with ISO179-92, GB1043-93, JB/T 8762-1998, JB/T8761-1998 standards
Specification:
Model | HT-5D-CM | HT-50D-CM | HT-5-50D-CM |
Izod pendulum energy | 1J, 2.75J, 5.5J | 11J, 22J | 1J, 2.75J, 5.5J, 11J, 22J |
Charpy pendulum energy | 1J, 2J, 4J, 5J | 7.5J, 15J, 25J, 50J | 1J, 2J, 4J, 5J, 7.5J, 15J, 25J, 50J |
Charpy impact speed | 2.9m/s | 3.8m/s | 2.9m/s(≤5J), 3.8m/s(≥7.5J) |
Charpy pendulum center distance | 230mm | 395mm | 230mm(≤5J), 395mm(≥7.5J) |
Izod impact speed | 3.5m/s | ||
Izod pendulum center distance | 335mm | ||
Pendulum angle | 150° | ||
Measurement accuracy | ±0.1% | ||
Resolution | 0.03% | ||
The distance from the izod impact blade to the upper plane of the jaw | 22mm±0.2mm | ||
Izod edge fillet radius | R=0.8mm | ||
Charpy impact edge fillet radius | R=2mm±0.5mm | ||
Charpy impact blade angle | 30°±1° | ||
Charpy impact edge fillet radius | R=1mm±0.1mm | ||
Charpy impact support front angle | 5° | ||
Charpy impact support rear angle | 10° | ||
Output mode | Printout or U-disk output | ||
Supply voltage | 110~230VAC 50/60Hz | ||
Appearance size (L*W*H) | 85cm*37cm*65cm | 106cm*37cm*78cm | 106cm*37cm*78cm |
Weight | About 80kg | About 100kg | About 120kg |
The sample type meets the requirements of GB1843-80, ISO180-82 and JB/T8761_1998.
![HT-KL120 Table Type Rubber Mixing Machine [Electric Heating]Digital Open Rubber Mixer/Plastic Double Roll Mixer](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/loBpiKnllkSRqkjjinipio/tupian1-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating],Rubber Kneader Equipment HT-KL80](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/lnBpiKnllkSRqkjjinjoio/7_800-640-640.png)
![Table Type Open Rubber Mixing Machine [Electric Heating+Water Cooling]，Rubber Mixer Machine HT-KL120-EW](http://iqrorwxhpjqlln5p-static.micyjz.com/cloud/llBpiKnllkSRqkjjinoiio/tupian1-640-640.png)
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.