Plastics Hdt ASTM D 648 Thermal Deformation Vicat Apparatus Softening Point Test Machine

Plastics Hdt ASTM D 648 Thermal Deformation Vicat Apparatus Softening Point Test Machine

Non-metallic material testing instruments designed and manufactured according to the latest international and national standards are mainly used for thermal testing of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, and high-strength thermosetting laminates. Determination of deformation temperature and Vicat softening point temperature. It is a highly intelligent testing instrument with convenient operation and precise control, and is widely used in colleges and universities, scientific research units and product quality supervision and inspection units. Using LED digital tube display, the test results are intuitive and clear.

Specification:

1) Temperature control range: room temperature to 300 ° C;

2) Heating rate: 120 ° C / h, 50 ° C / h;

3) Maximum temperature error: ±0.5 °C;

4) Temperature measurement point: 1;

5) number of sample racks: 3;

6) Deformation measuring gauge: digital display dial gauge;

7) Deformation measurement range: 0 ~ 1.1mm;

8) Sample support span: 64mm, 100mm;

9) Maximum deformation measurement error: 0.01mm;

10) Heating medium: methyl silicone oil; (prepared by customers)

11) Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling;

12) Instrument size: 810mm × 470mm × 780mm

13) Space required: 0.5m front and back, 1.5m left and right

14) Power: 2500VA 220VAC 50HZ

Configuration

 1) 1 x Host

 2) 3 x Sample holder

 3) 3 x Hot deformation heads

 4) 3 x Vicat pinion

 5) 1 x Electric control box

 6) 3 x Digital display dial gauge

 8) 1 x Signal line

 9) 1 x Screw screwdriver

 10) 1 x Weight set

Remarks: Users need to have cooling water source and ventilation smoke exhaust equipment