Manual Type Melt Flow Index Extrusion Plastometer Tester For PP PET Raw Material Test Plastometer

Manual Type Melt Flow Index Extrusion Plastometer Tester For PP PET Raw Material Test Plastometer

Product description：

Melt index Tester conform to the requirements of the standard of GB/T3682-2000. The main parameters of Melt index instrument also conform to the requirements of the standard IS01133-97,ASTM1238, JIS, which can be used to test polyethylene, polyethylene splendid alkene, polystyrene, ABS, polyamide, fiber resin, acrylic ester polyformaldehyde, fluorine plastic, polycarbonate and so on the many kinds of plastic material of the melt mass flow rate (MFR) or melt volume flow rate (MVR). Widely used in plastic production, plastic products, petrochemical and other industries and related institutions, scientific research units and commodity inspection departments.

Main Technical Parameter:

• Extrusion part

Output port diameter: Φ2.095±0.005 mm, discharge port length: 8.000±0.025 mm(Optional: Φ1.050±0.005 mm, discharge port length: 4.000±0.025 mm)Loading cylinder diameter: Φ9.550±0.007 mm, loading cylinder length: 152±0.100 mm 

Piston head diameter: 9.475 ± 0.007 mm, piston head length: 6.350 ± 0.100 mm

• Standard test load: a total of 8 full weights

• Temperature range: regular room temperature - 400 ° C (500 ° C optional)

• Constant temperature accuracy: ±0.5°C

• Display resolution: 0.1 °C

• Cutting method: optional manual or automatic cutting

• Temperature recovery time: less than 4 minutes

• Print: Micro printer automatic printout

• Power supply voltage: AC220V / 50HZ or AC110 /600HZ; select different power supply voltages depending on the country of use

• Testing fluorine material is optional